Question about Sanyo Televison & Video

3 Answers

Sanyo model Dp 42023 comes on but picture flashes on and off sound is fine

Sanyo model Dp 42023 comes on sound is good but picture is blinking on and off . You can take a flashlight and read what's on screen like when setting up . It's a De chassis p42023-11

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 6,694 Answers

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Posted on Jan 03, 2017

  • Ricky Johnson Jan 04, 2017

    Thanks decided to replace the T-Con Board for $19. Let you know if that works.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Know this answer click- spain Spanish World

Posted on Feb 06, 2017

Testimonial: "Got mine fixed had one bad led back light was no problem to fix at all ."

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 3 Answers

The association pulled in the support of big names who promised not to wear hide. Hostile to hide dissenters showered White paint on those Vin Diesel Jacket wearing hide in broad daylight.Please Visit Our Website: Vin Diesel Fast Furious 7 Jacket For Women

Posted on Jan 26, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my Sanyo CE32LD17-B screen work? The buttons all make noises and the light flashes but no other picture or sound. Help, please?


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Aug 07, 2015 | Sanyo Televison & Video

1 Answer

My Sanyo 42 TV model do 42545 have no sound or picture and the green light (Power) have one long blink then two short blanks


One long blinks~two short blinks = the error code is [12]. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Dec 03, 2014 | Sanyo Televison & Video

1 Answer

My Sanyo Flat Screen TV is dead. No Picture and No Sound. Model No. CE32LD08N-B


Year of model. it may be time to replace this if you have some age. Sanyo those are very good units but they are replaceable.

Nov 23, 2014 | Sanyo Televison & Video

1 Answer

The standby light on my Sanyo T.V is blinking and the T.V will not come on


I am having a problem with my Sanyo Flat Screen 42". I get a picture for a day or two and all the sudden I have no picture or sound, so I plugged in the red,white and yellow cord and then the picture came back on. Now today it is out again......

Aug 28, 2010 | Sanyo Televison & Video

4 Answers

Hello my Sanyo dp42849 42 inch has no picture and no sound. when i turn on the tv a green light in the bottom right hand corner comes on and occasionally flashes off and then back on.


First, you need to know the sub-model of your TV.

It is called "chassis" and is shown on the back of the TV on the label where the model number is shown.

For example it can be "P42849-00" or "P42849-01".

Then search at www.coppelltvrepair.com/search or just go to www.coppelltvrepair.com and enter the link for SANYO DP SERIES to search for that.

Here's an example of a repair service (note it may NOT be the one for your exact model though!):

http://www.coppelltvrepair.com/p/41/sanyo-dp42849-p42849-00-does-not-power-on-repair-service

Hope this helps!

Jul 16, 2010 | Sanyo 42 in. LCD TV

1 Answer

Green light blinks but no sound no picture


Power surge will knock out picture and sound if you don't have a power strip. Found out from Best Buys when purchasing another LCD TV. They have a warrenty against such problems.

Jan 18, 2010 | Sanyo DP19648 19 in. LCD TV

1 Answer

Sanyo LCD HDTV Model #DP26746


I am missing the stand to my Sanyo LCD TV. (DP 32647). I dont know where to buy a replacement one.

May 04, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,037 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71126 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4706 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...