It says pair you remote. My remote is not blinking

In order to pair your RMT-D197A remote to your Philips TV, follow these steps: 1. Power on the TV with the remote. 2. Press and hold the Setup button on the remote until the red LED light blinks twice. 3. Input the four-digit code that corresponds to your brand of TV on the remote. This should be found on the enclosed code list. 4. Release the Setup button. If the code is correct, the red LED light will blink twice. 5. Aim the remote at the TV and press the Volume Up button. If the TV responds, the remote is paired correctly.

The issue with your Samsung Solar Remote not syncing with the TV even though the Bluetooth icon is appearing on the TV could be caused by a few different things. Here are some troubleshooting steps you can try to resolve the issue:

1. Check the battery: Make sure that the battery of the remote is charged and inserted correctly.
2. Move the remote closer to the TV: The remote should be within 30 feet of the TV to ensure a strong Bluetooth connection.
3. Turn the TV off and on again: This can help to reset the Bluetooth connection between the remote and the TV.
4. Remove the pairing information: If you have paired the remote with another device before, it may have saved the pairing information and is interfering with the new pairing. Try removing the pairing information from the remote and the TV and then pair them again.
5. Reset the remote: You can reset the remote by removing the battery, then pressing and holding the power button for 10 seconds, and then releasing it. Reinsert the battery and try to sync the remote again.

If these steps don't resolve the issue, try contacting Samsung support for further assistance.

The LG AKB73615337 remote control is designed specifically for LG TVs and may not be compatible with the Xfinity Flex box. However, you can try the following steps to see if it works:

1. Ensure compatibility: Confirm that the LG remote control is compatible with the Xfinity Flex box by checking the list of supported devices in the remote control's user manual or by contacting LG customer support.
2. Power on the Flex box: Make sure your Xfinity Flex box is powered on and connected to your TV.
3. Activate pairing mode: Put the LG remote control into pairing mode by simultaneously pressing and holding the "Back" and "Home" buttons for a few seconds until the LED light on the remote starts blinking.
4. Follow the Xfinity Flex box pairing instructions: Refer to the Xfinity Flex box's user manual or contact Xfinity customer support to find the specific instructions for pairing a remote control. This process may involve entering a pairing code or following a series of steps on the TV screen.
5. Test the remote control: Once the pairing process is complete, test the LG remote control to see if it works with the Xfinity Flex box. Try navigating the menu, changing channels, adjusting volume, and performing other functions to ensure proper functionality.

If the LG remote control does not work with the Xfinity Flex box or if the pairing process is unsuccessful, it is recommended to use the original remote control that came with the Flex box or consider purchasing a universal remote control that is compatible with the Xfinity Flex box. Universal remote controls are designed to work with multiple devices and usually come with instructions for programming them to work with specific devices.
Remember to consult the user manuals of both the LG remote control and the Xfinity Flex box for specific instructions and contact customer support if you encounter any difficulties during the pairing process.

The locomotive is not receiving the single from the remote . You need to paire them. In the Manuel should be intuitions for pairing. Hope this is some help.
REDEAGLE

What do the different Remote control front LED lights mean?

• Blink blue color twice per second: Remote control has paired NeoTV PRIME and is trying to connect NeoTV PRIME.
• Blink blue color once per second: Remote control is trying to pair the NeoTV PRIME.
• Orange blinking: Remote control battery is low. Please replace a new set of AAA battery.

go to page 15 of the following document:

http://www.netgear.com/landing/stream/img/gtv-specs/GTV100_IG_25Oct2012.pdf

Please remove the battery case door and remove the batteries from the remote control.
Insert the batteries after a few seconds.
Press the purple pairing button which would be at the battery compartment to put your Roku remote in pairing mode.
Confirm the LEDs on the front of the remote are blinking continuously.
Remove the power cord from your Roku player and re-insert it to restart your Roku player.
When your Roku player fully re-starts, it will automatically enter pairing mode and recognize and connect to your Roku game remote.

The "pair" the remote with your system:

1.PRESS AND HOLD the f button on the remote UNTIL the transmit LED lights solid (approximately 10 seconds)
2.PRESS AND HOLD the remote start button (circle arrow) UNTIL the LED blinks 3 times and the amber transmit LED lights up. Your remote is now ready to pair.
3.. Turn the key to the on position
4.Within 5 seconds PRESS AND RELEASE the control button on the antenna.
5. Within 5 seconds PRESS AND HOLD the control button. The status LED will flash one time and the siren will chirp to confirm that the system is ready for remote pairing.
6. Press lock button on remote. System will respond with chirp toconfirm pairing.

Turn on the TV, on the remote press TV, press and hold the SET button till it blinks once pauses,then blinks twice,release, then enter one of these codes,083,100,127,217, it will blink twice, then aim the remote at the TV and press the POWER button, the TV should turn off,if not , repeat the steps using a different code until you find the one that works the TV. ..hope this helps..

Fiend your solution direct from nintendo. Here is your solution....


http://www.nintendo.com/wiiconsole/prob676ijt65/solution

aqrtyctr-60