Question about Samsung Televison & Video

2 Answers

Correct inverter board for Samsung plasma TV

Hi so my dad has asked me to get him an inverter board that will fit his plasma TV, the model number of the TV is PS50B450B1WXXU. I have no idea where to begin, I would really appreciate any help, thank you.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 2,184 Answers

Http://www.lcd-plasma-parts.co.uk/bn41-01180a-bn94-02845a-samsung-ps50b450b1wxxu-main-board
read the page above to get pointed in the right direction as it helps to explain what is required to order the correct board

Posted on Jan 02, 2017

Testimonial: "Thank you !"

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 2,770 Answers

Happy New Year Leon Agyapong,

By putting your number (PS50B450B1WXXU) on eBay... immediately produced a "UK" power cord...

Which means most FIXYA volunteers are going to
have some difficulty ... The rightmost numbers of your SAMSUNG are the only thing that DIFFERENTIATES your set from our similar USA (domestic) models...

We just call them "power boards"... and they are popular
because the new industry standard for capacitors is
"cheap & cheesy"...

The bright-side = there is a bounty of "SPARES" on eBay...
and their reliability (& reputation) is NOT much worse...

(I'm just saying) Shop around...!!

Cautionary statements:
You MUST VERIFY your own circuit pack numbers
(stare & compare)

Get and use ESD (electro-static Discharge) wrist straps while handling EVERY CIRCUIT BOARD you care about.
(see below)

Take lots of pictures going in... Put EVERY wire
EXACTLY back from whence it came...
and... FORCE NOTHING.

PS50B450B1WXXU = UK
PN50C450B1DXZA = USA (wrong)
0results for PS50B450B1WXXU power

Carnac the Magnificent

Samsung PS50B450B1WXXU Plasma TV UK Mains Power Cable Cord 3 Pin eBay

Posted on Jan 02, 2017

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plasma tv problems


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Mar 25, 2017 | Samsung Televison & Video

1 Answer

Samsung tv un39fh5000fxza inverter needs replacing. Which board is it, and how do I find the correct model number?


Especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
http://electro-medical.blogspot.com/

Dec 06, 2016 | Samsung Televison & Video

1 Answer

SAMSUNG MODEL LN46C750R2FXZA TV HAS SOUND BUT NO PICTURE. NO BACK LITES GLOWING IN DARK. WANT TO DOUBLE CHECK BEFORE ORDERING PART.


Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Nov 06, 2016 | Samsung Televison & Video

1 Answer

My Samsung Plasma TV screen doesnt always turn on. Often I have to turn it on and off several times before the picture appears on the screen.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced

Feb 09, 2016 | Samsung PN50A650 49.96 in. Plasma HDTV

1 Answer

Why have I got sound but no picture?


Hi,
I suspect the inverter board has has gone.
Samsung has a few common faults with their tv sets. can get one for around 20 -30 pound,pretty easy to fit.Hope this helps.

Sep 24, 2012 | Samsung PS50A466 50 in. Plasma HDTV-Ready

1 Answer

I have a Samsung PN50C590 50" Plasma TV. My nephew hit the screen and broke. I need a new TV Screen for a model No. PN50C590G4FXZA. Any idea's where I can get a used part to repair my broken...


Hi
Contact Samsung in your area and ask them for a list of phone numbers for all the closest service centres who deal with Out Of Warranty issues in your area. These will most likely be 3rd party repair centres, call them all and ask if they they have any second hand spares, if they do, get a quote if you cant fit it yourself.
Buying a brand new screen is most probably not economical and would cost close to the price of a new television.
Good luck :) Mike

Aug 24, 2011 | Samsung PN50C590 TV

2 Answers

Viewsonic n2750w inverter board, can i get new


Hi
Go here for an invertor you seek. Is from a different make/model, but is the correct part,
Thanks for using FixYa. Good luck with your repair.
regards robotek

Jul 08, 2009 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

42'' Samsung Plasma Tv Screen went black but the sound works.


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Sep 23, 2017 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...