Question about Lands Phones

Open Question

Can we use if phone connected parallel used for intercom on BEETEL TELEPHONE INSTRUMENT DF 5200

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Office NEC phone to be used at Home

This phone is a proprietory digital phone that only works with a KSU. You would need an IPK or Elite phone system to make it work. You would also need to program it. This is a business office system and that phone will not work unless it is plugged into the system.

Posted on Feb 05, 2009

  • 25 Answers

SOURCE: how do i switch from intercom to telephone?

If you unplug your phone and plug it back in, perhaps that will work for you. Ours always flashes when we do that but if you have a cell phone, just call your landline and it should return to normal. Hope that works.

Posted on Nov 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beetel telephone circuit diagram


Yah you might wanna try to replace it

Jan 18, 2014 | Lands Phones

1 Answer

Beetel telephone


The noise could be caused by a dirty phone line connection at the wall socket. Clean any corrosion off the contacts on the phone wall socket where the phone base station lead connects into the wall socket.

May 21, 2013 | Lands Phones

1 Answer

How do I use the intercom ?


Since you declined to specify the model of your Uniden DECT 6.0 telephone, please select it from the list beginning here to download a copy of the manual.

Dec 03, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

How to use the intercom system


  • Check your telephone to see if it has an intercom feature. Many wireless phones that come with multiple units allow you to temporarily turn one unit into an intercom to contact other units attached to the same wireless phone system. Depending on the model, you can contact all the other phones at once, or a single specific phone, by pushing the intercom button and entering the other mode. To put the phone back into regular mode, all you have to do is switch off the intercom option.

  • Contact your telephone provider. Some telephone service providers allow landline phones to call themselves, which enables the phone to function as an improvised intercom. You would simply pick up the phone, dial and then close the connection. Once the phone is answered elsewhere in the house, you will have established a line to another phone and you can speak normally on it. This has largely been eliminated due to lack of need as technology advances, but it may still be an option with some providers.

  • Purchase and install an intercom system that will work through an existing phone line. Many of these products, some of which are produced by Panasonic, operate as a halfway point between a traditional intercom system and a phone line. The exterior intercom links directly to the phone line, and you can pick up the phone and talk through the intercom unit outside once the system is properly set up

  • Dec 18, 2010 | Uniden Cordless Phone

    1 Answer

    Cannot receive phone calls on a dsl setup


    There must be DSL Spliter inbetween telephone line & Wi-fi modem. Please check whether you have connected telephone instrument line with that Spliter or not. According to me, Telephone instrument should connect to telephone line option on DSL Splitter to use same telephone line as internet as well Telephone.

    Mar 03, 2010 | Computers & Internet

    2 Answers

    Talkin between two parallel phones


    Simple. Press 161 on one phone set. After you hear the beeps, put the receiver down. You'll hear both phone sets ring. Now you can pick up your receiver and the person on the other floor can pick up the receiver there, and you can talk. There is no cost involved.
    __ L.R. Hegde

    Jun 21, 2009 | Lands Phones

    1 Answer

    I have a NEC ETW 16DC-2 phone that does not ring with calls


    The telephone instrument you have can be used on the NEC Electra Professional Level I, and the Level II systems (and under some conditions the NEAX 2000 series). Codes for features are somewhat different based on the system. It is possible that your phone is in "Do-Not-Disturb" if other phones on your system actually ring when they are called via the intercom (on the Level I and Level II systems, initial intercom ring is a system wide setting). The cancel DND code is: Level I system: with telephone idle, press <FNC>, dial 60, press <FNC>. Level II system: with telephone idle, press <FNC>, dial 69, press <FNC>.
    It is also possible that your ring volume is very low. To adjust, press <SPKR>, dial 601, then adjust volume using the up/down keys at the bottom of the phone (press <SPKR> when finished. If your system is programmed to access an outside line when you press <SPKR>, you will need to press the <INTERCOM> button first.)
    If your system is set for voice intercom, people calling your phone can make it ring by dialing a "1" after your intercom number.
    If you do all this and your phone still won't ring on incoming calls, let me know and we'll have to go into system programming to correct it.

    Jan 06, 2009 | NEC Electra Professional ETW-16DC-2

    1 Answer

    Phone not working. I left it unpluged all night to reboot. Same proplen. No service in or out. Badse keeps flashing "Welcome Please wait"


    Pls check if the intercom function works. If yes, then the base is simply waiting for the presence of a dialtone on the telephone line. It would be required to check your telephone wire connections. Further, if you have an extension telephone, pls verify that indeed you have dialtone along the same line. In most instances, you may need to contact your phone provider to verify service.

    If no intercom function, it may simply need pairing again or redo the initial install setup.

    Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

    Good luck and kind regards. Thank you for using FixYa.

    credits: Benimur

    Aug 12, 2008 | Uniden Cordless phone EXS9950

    6 Answers

    2-9450c telephone will not setup


    Each telephone must be connected to line 1 and line 2 for
    proper operation. The remaining lines 3 and 4 may — or may not —
    be connected to each station as you desire. First plug in the battery, then the phone lines (1 & 2 are mandatory), and third the power cord. If your intercome LED is blinking red and green, then press: STORE IN, followed by "INTERCOM" followed by a free intercom# (i.e., any of the memory buttons 1 through 16 not already assigned to another telephone set. Then wait for the phone to go through its initiation sequence during which it searches each of the four possible lines. After that concludes, you should get dial tone on your active lines. :-) Marco

    Sep 26, 2007 | GE 2-9450C Corded Phone

    5 Answers

    My intercom button flashed red to green. When I push a line button, I get a two-tone beep but no dial tone. I changed the internal 9 v battery. I unplugged the phone and waited, then plugged it back in....


    Each telephone must be connected to line 1 and line 2 for
    proper operation. The remaining lines 3 and 4 may — or may not —
    be connected to each station as you desire. First plug in the battery, then the phone lines (1 & 2 are mandatory), and third the power cord. If your intercome LED is blinking red and green, then press: STORE IN, followed by "INTERCOM" followed by a free intercom# (i.e., any of the memory buttons 1 through 16 not already assigned to another telephone set). Then wait for the phone to go through its initiation sequence during which it searches each of the four possible lines. After that concludes, you should get dial tone on your active lines. :-) Marco

    Aug 29, 2007 | GE 2-9450C Corded Phone

    Not finding what you are looking for?
    Lands Phones Logo

    Related Topics:

    29 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lands Phones Experts

    kakima

    Level 3 Expert

    102366 Answers

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Are you a Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...