Question about Exercise & Fitness

2 Answers

Pacemaster pro elite INCLINE MOTOR DOES NOT WORK

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 144 Answers

Hi There, Pacemaster Pro may take a specific control board mounted to the front plate of that treadmill on a thin aluminum heatsink? If so, these can often be repaired at buyfitnessrepairpartsDOTcom but there is a note to these....there is a programmed chip (IC) on that lower board that controls the functionality of the lower boards, speed, lift etc.... It happens in maybe 25% of the cases this IC will be damaged or fried, and if this happens, the control board is useless. The listed repair facility is maybe your best bet for repair of this unit. Good Luck!

Posted on Jan 03, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,694 Answers

If you wish to get some details about treadmill repair and service ; visit the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Posted on Jan 02, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust tension belt on pacemaster proselect treadmill


Tread Belt Tension Adjustment - Aerobics ProSelect ...

www.manualslib.com > ... > Treadmill > ProSelect > Owner's manual
Aerobics ProSelect Manual Online: Tread Belt Tension Adjustment. Step One:Locate ... Treadmill Aerobics PaceMaster Gold Elite Owner's Manual. Treadmill (38 ...

Aug 26, 2015 | Exercise & Fitness

1 Answer

New Magnetic Key


Go to walmart and look in kitchen goods. Look for refrigerator magnets and find small one... It will work... Looks cute too.

Jun 22, 2014 | PaceMaster ProPlus II Treadmill Incline...

1 Answer

Treadmill belt will not move


This can be caused by a few things...call for service 877-805-1030

Jan 03, 2014 | PaceMaster Gold Elite Treadmill Deck

1 Answer

Pressed express incline then machine went to top incline and received error 306. What is the problem?


Err 306 - Indicates power supply problem at start up.
1. Check all wiring for proper connections and damage
2. Replace the lower power supply board.
3. Replace the drive motor.
Recommended Parts: lower power supply board, wire harness.

I would suggest you get a tech out first. 877-805-1030

Dec 24, 2013 | PaceMaster Silver Select XP Treadmill

1 Answer

I have a Pacemaster Gold treadmill that will not hold elevation. I have no error codes. It will go to the proper elevation and then immediately start descending. If I change the elevation setting it will...


Run the utility software calibration for easy diagnostic, and fix it.
Go to HOOD open the cover motor and follow the steps indicated. or your owner manual.
God bless you

Sep 30, 2013 | PaceMaster Gold Elite Treadmill Upper...

1 Answer

Pacemaster treadmill will not start, no lights, nothing.


Is there a spot on the control board you can check for out going power? You might have a bad board. You can visually inspect your board for anything that looks burnt or one component that looks swolen or loose. Poor solder joints are a common problem with treadmills because of the constsant movement.

Feb 18, 2013 | PaceMaster Aerobics Pro Plus Walking Belt

1 Answer

Treadmill no longer asks me for my weight, and I want to reset it.


try to turn off the machine. and reset the button and try again.
After that RUN the software calibration for easy diagnose, troubleshooting and fix it.
Happy New year. God bless you

Jan 01, 2013 | PaceMaster ProSelect Treadmill Incline...

Not finding what you are looking for?
Exercise & Fitness Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Sportsmith LLC
Sportsmith LLC

Level 3 Expert

914 Answers

Tom Chichester

Level 3 Expert

34255 Answers

Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...