RC-DO308CAN I USETHIS REMOTE ON VR-616 - Audio Players & Recorders

Yes it does. It has no dedicated socket for a record deck. You can connect the deck via a magnetic cartridge pre-amp to the Aux jacks.

Yes over AUX-ilary with an riaa-preamplifier inbetween if moving magnet or moving coil if a phono is used ceramic / crystal phono element is used it can used without any pre amp
http://manual.kenwood.com/files/B60-5228-00.pdf

Unplug power cord from the wall outlet, then plug it back IN WHILE HOLDING DOWN THE POWER KEY = only for U.s.a and Canada

For other Countries With the power cord plugged in, turn the POWER key
OFF. Then, while holding down the ON/STANDBY
key, press POWER.

Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 3 days.
• Power mode. • Distance setting.
• Input selector settings. • Input mode setting.
• Picture output. • Midnight mode setting.
• Speaker ON/OFF. • PRO LOGIC II mode setting.
• Volume level. • Broadcast band.
• BASS, TREBLE, INPUT level. • Frequency setting.
• Dimmer level. • Preset stations.
• MD/TAPE settings. • Tuning mode.
• Listen mode setting. • CINEMA EQ ON/OFF.
• Speaker settings. • LOUDNESS ON/OFF.
• SW RE-MIX ON/OFF.
Cautions
MODEL PARTS # REMOTE CONTROL # DESTINATION
VR-705-SA A70-1612-05 RC-R0626 K1P1
VR-707A A70-1617-05 RC-R0824 K2P2
VR-716A A70-1617-05 RC-R0824 K4P4
REMOTE CONTROL vs MODEL
DIFFERENT POINT
ACCESSORIES / CAUTIONS
Model Service Manual Surround Display Sub
VR-705 B51-5840-00 X09-6740-10 -
VR-705-SA - X09-6740-11 X25-6600-10
VR-707 B51-5840-00 X09-6750-12 X25-6520-12
VR-707A - X09-6750-14 X25-6610-10
VR-716 B51-5840-00 X09-6750-11 -
VR-716A - X09-6750-13 X25-6600-10
Note:
A different information will be available from this service manual. Pls refer to original service manual(B51-5840-00), too

Get a Logitech universal remote, and never look back.

The remote is an RC-R0812

http://remotes.com/remotes/servlet/rs?a=gmi&uuid=13185948500760&smodel=VR510&brand_pn=KENWOOD_VR510

eBay has a used one for under $20 right now.
http://www.ebay.com/itm/Kenwood-Remote-/120788522730?pt=Receivers_Tuners&hash=item1c1f8e96ea

You should jump on it.


The manual...
http://www.retrevo.com/support/Kenwood-VR-510-Receivers-manual/id/480ag225/t/2/

Hi,
Here are some remote codes for Kenwood Receivers.
The codes are as follows: One of them should work
0027, 0077, 0313, 0186, 0314, 0356

Here is a link to a web site that has universal codes for remotes.
http://www.hifi-remote.com/ofa/codes-amp.shtml#amp

Hope this helps,
Best Regards,
Mark

I had the same issue on my VR-505 and here is how I fixed it. I found the fix on a different site and kudos to Plazman30 for posting it!

[Link: mysite.verizon.net]

J

Kenwood radio tuners normally use one of the following remote codes:

025,066,068,071,and 075.

Sorry I don't know which is specific to vr-616.

i WILL BUY YOUR Kenwood RC-R0608 Remote
rlupton@atral.com

RC-R0911