No sund from visio tv hooked to dish network with HDMI

Hello,

When the DISH Network installed hooked up their DVR, did they connect it via HDMI? If so, then it could be a bad HDMI connection. I would bet they simply bypassed your receiver and went straight to the TV, which is why no audio comes out of your receiver. You can test this by turning on your DVR and TV. If you see picture with your receiver OFF, then they bypassed your receiver. You'll need to hook up and HDMI cable from the DVR into the receiver and then out of the receiver to the TV.

Use the RECOVER button to get back to watching satelliteprogramming if you accidentally change channels or inputs on your TV. Press POUND. Press & hold the TV Mode button until all Mode buttons light up. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2.


to download the User Guide - Dish Network

www.dish.com/downloads/tv.../2-Way_RC_UserGuide.pdf Dish Network
Feedback

Program Remote to TV/Other ' MyDISH ' DISH Customer ...

https://www.mydish.com/support/program-remote-to-tv

Use your TV remote "input" "source" or "tv video" input button. If using the.Dish remote press the clear tv button then input. Repeat to go back to HDMI. Make sure you press sat to change channels once you get back on the HDMI input for dish

Hi Tammie, my name is Kimberly and I forma part of the Social Media Department with DISH. I Apologize for the delayed response. I hope this answer helps you in the future or can help someone else that may have the same question. In order to hook up a Joey to Audio all you need to do is make sure you will be connecting the Joey's output into the Audio's Input. For example if you will be connecting the joey directly to the Tv, using an HDMI cable, the Joeys Output for HDMI has to simply connect into the Input for HDMI on the Tv itself. Feel free to reach me at: kimberly.escobar@dish.com with any questions or concerns.

Hi my name is Mike Houston of DISH Network and I see you want to connect your HDMI cable to your 511 DVR receiver. To have capability for your HD TV you will need to have a VIP HD series receiver, I will be more than happy to assist you with this and you can contact me at Michael.houston@dishnetwork.com.

Hi my name is Mike Houston of DISH Network and I see youhave DISH Network HD the hdmi does not work. Depending on what the TV is set to;480, 480i, 720, 1080i will depend on what you have your receiver set to. Afteryou check your TV settings press the buttons of Menu-6-8 and it will take youto HDTV Setup. Make sure your TV settings match your DISH Network HD settings;if you have anymore questions please e-mail me at Michael.houston@dishnetwork.com.

hi,
Check the version of the hdmi cable you used. Try to use hdmi cable version 1.3 or above . Also try hdmi cable with version 1.2 .Version of the cable is very important one.
ok

Get a replacement receiver and see if this does not resolve the issue. I expect it will though. In the interim try a different port on the tv if you have multiple HDMI inputs and another HDMI cable if you have one available just to ensure that our suspicions are correct.

Thanks for using Fix Ya and being a valued Dish Network customer.

ya dish network reg box isnt hd ok u need call dish get hdtv box then u can use hdmi cable to get hi end picture ok for now use cox cable like u do to u can upgrade dish hd sumday k

I bought a 42" Visio LCD from Costco and used code 10030 and it worked. It is the code for Goldstar TV.