Question about Lexmark X9350 All-In-One InkJet Printer

1 Answer

Lexmark x9350 printer problem

Error message reads "Printer carrier stall. Check inside the printer for obstructions then press [tick]"

How can this be fixed?
Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 86 Answers

This is the result of a lose belt or dislodged spring, tightening the belt.

There is not much you can do, you can attempt to open the printer up and tighten the belt, however, it would be easier to buy a new printer.


Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

X9350 loose belt


This printer has opposite side belt driver gear please adjust this gear

Apr 24, 2013 | Office Equipment & Supplies

1 Answer

Reads error #1200 when switched on, when the panel is raised up to check the cartridge it does not slide back and it does not print well at all. the brand is lexmark X4270 All-In-One inkJet printer. What i...


I noticed your message while searching for answers to repairing another Lexmark printer. You probably already have the answers by now but here is what the manual says.

Hardware Error: 1200

The All-In-One is stalled.

1. Press Power to turn off your all-in one.

2. Unplug your all-in-one fro the wall outlet.

3 Check for paper jams.

4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.

1. Turn off you all-in-one

2. Unplug the all-in-one form the wall outlet.

3. Open the control panel.

4 Open the cartridge access door

5. Make sure the cartridges are snapped in place in the carrier.

6. Check for objects obstructing the carrier.

7. Plug in your all-on-one

8. Press power to turn your all-in-one back on.

Hope this resolves your issues.

The ultimate fix for this problem is to give your Lemark and Dell printers to people that you really dislike. Let them live with the frustration. Then buy yourself a Hewlett Packard, Canon, or Epson printer. Check the cost of the cartridges for each brand prior to making a purchase. Purchase the printer with the least expensive cartridges and one that will take the generic (compatible) cartridges available in retail stores and refill stores. My personal favorite are the Epsons. They print excellent colors and are very affordable to own, and most important, operate.

Jan 19, 2011 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Displays error 502


Error 502 means that the printer has stalled. Probably caused by the carrier getting stalled or a paper jam. Check of any paper jams or check inside the printer where the cartridges are. Make sure the cartridges are well-seated in the carrier. You can remove the cartridges and insert them back in. Check around the carrier for any foreign objects or any obstruction along its way.

Apr 02, 2010 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Lexmark X4270 shows error message #1200 and to consult User Guide. We do not have one and do not know what error #1200 is.


Hardware Error: 1200

The All-In-One is stalled.
1. Press Power to turn off your all-in one.
2. Unplug your all-in-one fro the wall outlet.
3 Check for paper jams.
4 Plug in your all-in-one

Cartridge Error: 1200

The cartridge carrier is jammed.
1. Turn off your all-in-one
2. Unplug the all-in-one form the wall outlet.
3. Open the control panel.
4 Open the cartridge access door
5. Make sure the cartridges are snapped in place in the carrier.
6. Check for objects obstructing the carrier.
7. Plug in your all-on-one
8. Press power to turn your all-in-one back on.

That's all the information I could find.

Jan 15, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Carrier Stall is the error


Hi,
Please do the following..

To check the cartridge carrier:
  1. Unplug the printer.
  2. Move the cartridges to the left by hand and then take them out.
  3. Try to print without the cartridges in the carrier. Do you still receive a Carrier Stall error message?
  4. If not, put the cartridges back into the carrier and snap them in at the back. The message should no longer appear.
If the power light on the printer is not blinking, the error message may be caused by a communication error. Do the following:
  1. Remove any other devices attached to the USB/LPT port.
  2. Uninstall the Lexmark printer.
  3. Connect the printer directly to the PC and ensure that power is being supplied to the printer.
  4. Reinstall the printer.
Thank you....

Jan 26, 2009 | Lexmark X83 All-In-One InkJet Printer

1 Answer

Printer carrier stalls for obstruction and there is no obstruction x4875 lexmark


Check printer drive belt for worn out teeth and also ensure that the printer shaft is free of greezeand dirty.

Dec 25, 2008 | Lexmark X4875 InkJet Printer

3 Answers

Printer carrier stall


I am getting a "Printer Carrier Stall" message and "Check printer for obstruction" message. what can I do to fix it?

Oct 03, 2008 | Dell 966 All-In-One InkJet Printer

1 Answer

Lexmark x83 carrier stall


http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:95:0:0&framed=&docid=ENUS22722&relevance=0
Use the above link to trouble shoot the problem.

Error: "Carrier Stall" ID:470

To check the cartridge carrier:

1. Unplug the printer.
2. Move the cartridges to the left by hand and then take them out.
3. Try to print without the cartridges in the carrier. Do you still receive a Carrier Stall error message?
4. If not, put the cartridges back into the carrier and snap them in at the back. The message should no longer appear.

If the power light on the printer is not blinking, the error message may be caused by a communication error. Do the following:

1. Remove any other devices attached to the USB/LPT port.
2. Uninstall the Lexmark printer.
3. Connect the printer directly to the PC and ensure that power is being supplied to the printer.
4. Reinstall the printer.

Feb 24, 2008 | Lexmark X83 All-In-One InkJet Printer

1 Answer

Error 1200, printer carrier stall


check printer belt for missing teeth if none are missing lubricate carrier bar(big siler bar that ink cartrides trvel along) with 3in 1 oil with power off then back on to retry

Jan 06, 2008 | Dell 922 All-In-One InkJet Printer

2 Answers

Photo ink cartridge isn t recognized


Look in your printer manual or the pc manual for it and check to see if the 40 cartridge is actually compatable with your printer. You may have bought the wrong one. I would complain about the lexmark store to the main lexmark company because not only is that pure ignorance, they have a resposibility to sell the correct gear to customers, and to satisfy consumer rights. Always make sure the cartridges are the right ones first as once open many stores give you hell over replacement even with docket. Keep all dockets until next replacement (i stick mine to side of printer!) If it is the right cartridge, you may have a dud, in which case the store has to take it back, demand it!, or you may have to clean your heads with printer program or manually with solution and cotton buds (q-tips)

Aug 12, 2007 | Lexmark X9350 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X9350 All-In-One InkJet Printer Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...