Question about Sewing Machines

Open Question

I cannot add letters to a design using editor lite v4. When I open the downloaded alphabet to preview on the PC hoop, it will delete the first design.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 185 Answers

SOURCE: 180E Hoop problem

Joan, there are 3 micrositches on your embroidery unit arm. these switches are depressed when you attach the hoops, it appears from your comments that one switch is not functioning. This could be simple, it is out of alignment or more complex it is broken. Either way you need to take it to a professional for repair.

Posted on Feb 25, 2008

  • 185 Answers

SOURCE: bernina deco 600

Sorry to inform you but your machine only sews 4" x 4" . The arm on the machine can only move 4 inches up and down and 4 inches left and right.
The size of the hoop does not affect this. If you have a multi position hoop you can sew multi 4 x 4 areas without re hooping.

Posted on Feb 28, 2008

  • 2 Answers

SOURCE: I cannot get the editor lie V4 to write the

I would suggest you read this blog on Bernina's website. The moderator, Jo, has very useful information and will most likely solve your issue, and if not, you can always ask her a question, she's very quick to respond.

http://www.berninausablog.com/read/bernina-on-thequiltshowcom

Posted on Jun 26, 2009

  • 152 Answers

SOURCE: I'm using the Mega Single Hoop for the Viking

1. If the design came from the internet or a design package, it's possible that it's "center" has not been centered properly. To correct this you need to open the design in the Husqvarna Viking software and click on the "Center in Hoop" icon. That function redefines the center of the design so it will align properly in any hoop that it fits within. If you have 3d software, after clicking on that icon you physically have to put the black crosshair that designates the center in the design, in the very middle of the hoop and then save the design to your computer, then send it to the machine. The 4d software automatically centers the design in the hoop when you click on the icon.

If you have the software and you "combine" any designs together you must always click on the center design icon to recalculate or redefine the center position and then move the design's center to the middle of the hoop before saving the design. This way you center the designs center positoin around the needle position. Meaning that when you hit the start button on the machine, where ever the needle is, is where the center of your design is.

I hope this helps

Posted on Oct 15, 2009

  • 201 Answers

SOURCE: Husqvarna Viking Designer I breaking needles

Dls8864's suggestion was a very good suggestion - make sure the metal stitch plate is pushed all the way to the back. Also make sure that the thread is feeding freely - if it is catching on something it can cause the needle to be pulled aside and make it break. Does the design fit properly inside the hoop you are using? If the foot and/or needle strike against the side of the hoop, that will cause a breakage. Is the bobbin thread okay - not making a bird's nest underneath?

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Ready to stitch embroidery letters but nothing happens. The start/stop button and the number 10 design on the machine blinks. What is wrong?


Make sure the machine is on a solid, level surface. Also, it may not work if you don't have the correct foot on the machine.

Mar 12, 2015 | Singer Futura Xl-400 All-In-One Sewing And...

1 Answer

Install BX fonts


BX fonts at this time are compatible with Embrilliance keyboard lettering software. It is a file that is created by mapping alphabet design fonts in Embrilliance AlphaTricks. After the alphabet design font letters are mapped, the BX file is made and can be then installed in Embrilliance Essentials to choose from when using the keyboard lettering function.

Some vendors who offer alphabet design fonts (each letter/digit is a design at a specific size) will also offer the BX file for that alphabet design font so users of Embrilliance lettering software can also use it as a keyboard lettering font. More information about BX fonts can be found at the Embrilliance web site: Embrilliance embroidery software for Mac and PC

Note, to install a new font in a machine, you must contact and purchase from the machine manufacturer.

Jan 11, 2015 | Sewing Machines

2 Answers

Husqvarna adding sewing fonts


try checking on the huskqvarna website

Apr 18, 2014 | Husqvarna Sewing Machines

1 Answer

Can i do a large applique with my pfaff 7570 using the large hoop


Both the 7560 and the 7570 will only stitch out to the largest hoop it came with which is a 120 x 115 CM hoop (approx 4 1/4 x 4 3/4 inches). If you are using the Creative Big Fantasy Hoop or a Hoop-it-All you will need to split out the design so that each piece will fit within the 120 x 115 hoop. Transfer both designs to the machine. If using the original hoop, hoop your fafabric and stitch out the 1st design. Unhoop and rehoop again aligning the fabric with the hash marks on the hoop. You will have to move the design around on the screen to make a perfect fit. Stitch out the 2nd design. If you are using the Creative Big Fantasy hoop, you just have to hoop the fabric once, stitch out the 1st design and loosen the side screw on the hoop and slide the hoop into place for the 2nd design. Stitch out the 2nd design. The same process applied to the Hoop-it-All.

livingintx@yahoo.com

Feb 28, 2013 | PfaFF Creative 7570

1 Answer

I have a 440 QEE and the Editor Lite V4 will not install on my Windows7


you can try compability mode or check with bernina for undate or
a patch

Dec 07, 2012 | Bernina Sewing Machines

1 Answer

I bought a large hoop for my machine. But I still


From what I have been able to find out about this model, the embroidery area is limited to 4 x 4.

A larger hoop cannot change the built-in configuration of the machine's computer.

You can use a larger hoop, stitch out what you can and then re-hoop to finish - this is not easy to do.

Measuring the distance between the letters and then centering the last letter to match the previous stitching can be done, but it takes a little practice.

You can make a template using tear away stabilizer.

Stitch out the first 5 letters. Carefully remove the stabilizer - this is going to be a portion of the template.

Hoop another sheet of tear-away and stitch out the last 5 letters (these will partially overlap the first 5 when finished). Remove as in the first step.

Overlap the two templates (tape them together) and this should help you align the letters when you have to re-hoop.

Testing and a bit of practice is how I do it.

There is editing software for splitting designs and if you are interested - check Embird as it seems to be the most reasonable.

May 16, 2010 | Brother HE-120 Sewing Machine

1 Answer

I have a 170x100 hoop. My machine does not give


If it is not highlighted at the machine that means that the design you want to sew will not fit that hoop. You do not need a download for that hoop, just need to use designs that fit the embroidery field.

Sometimes you think a design will fit but the machine thinks otherwise. Trust the machine - it knows where the stitches are going and knows when it can't do it. I just loaded a design whose longest dimension was 97cm, other side was a lot smaller, but it would not let me sew it in the 100cm x 100cm hoop.

I was able to use my 150 x 150 hoop instead but if you do not have a choice of hoop, try downsizing the design in the Adjust menu. Try only one click each for height and width and then check if the hoop is available. If not, downsize one more click each dimension. Don't downsize a huge design using this technique - you won't like the result!

Nov 13, 2009 | Husqvarna Designer I

1 Answer

I cannot get the editor lie V4 to write the


I would suggest you read this blog on Bernina's website. The moderator, Jo, has very useful information and will most likely solve your issue, and if not, you can always ask her a question, she's very quick to respond.

http://www.berninausablog.com/read/bernina-on-thequiltshowcom

Jun 05, 2009 | Bernina Artista 180

5 Answers

How do you use the Plus Hoop on a Husqvarna Viking "Rose" Sewing Machine?


The plus hoop is a multi positional hoop that allows you you to embroider designs up to 4" x 6". It is essential for monogramming and lettering using your Rose. The Rose hooping system is the same as the 1+, the Scandinavia 300 and 400.

The designs you use must be formatted for the plus hoop. That is, the design has already been divided into two or three elements. Each element is an individual design. For instance, say the design is a long stemmed rose. It would probably be divided something like this: design 1: the flower and the top part of the stem, design 2: The middle part of the stem and the leaves, design 3: the bottom part of the stem.

You would hoop up your fabric to be embroidered, attach the hoop to the machine, set the hoop to position 1, select design 1, stitch out design 1, set the hoop to position 2, select design 2, stitch out design 2, set the hoop to position 3, select design 3, stitch out design 3. You should have a complete design when you're done and everything should match up perfectly!

The hoop is divided up into three squares, 4" x 4". Position 1 square overlaps position 2 square and position 2 square overlaps position 3 square. This overlapping allows the designs to stitch out more smoothly.

I hope this helps. Let me know if you have further questions. Carrie

Aug 27, 2008 | Husqvarna Rose

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...