Question about Jacuzzi Home

Open Question

We have a Koehler jacuzzi tub that has been installed for about four years but never used. When we push the start button the jets operate for about 2 seconds.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: Only 3 of 6 jets in jacuzzi tub working

Make sure the jets themselves are fully opened. Some models you can turn individual jets on & off

Posted on Dec 12, 2008

Ad
  • 145 Answers

SOURCE: jacuzzi

you have to call the maker of your unit because the gasket can start leaking if you use the rong kind of cleaner

Posted on Dec 12, 2008

  • 1 Answer

SOURCE: Jacuzzi tub works.....sort of.

motor for tub does not run checked electric its ok.. is there a reset button and does there have to be water in the tub?

Posted on May 20, 2009

  • 23 Answers

SOURCE: We've had a whirlpool tub with jets for 2 years.

check behind the access door for a air tube that goes from motor switch to button if either side has come off you have to re attach it just cut off 1/4 inch of the tube before you do. that will make it fit tighter

Posted on Jul 20, 2009

mrhotandcold
  • 248 Answers

SOURCE: Just drained jacuzzi hot tub and replaced

bleed pump check fuses and connections

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Regarding a 30x60 indoor jetted tub (Jacuzzi). When I push the on/off button, the pump slows down but then a few minutes later starts again on its own when there is no water. Any idea what is going


IF that is the one I recall, the switch is not connected to the tub. When you press the button, it sends air pressure to the switch under the tub to activate it;. You need to check the tubing and the switch

Feb 22, 2013 | Jacuzzi Home

1 Answer

Hytec Kohler Model LM34520 air jet swtich not working. 4 years old and last use, the push button stopped working. Cannot see connection detail at switch/button end but disconnected at motor and and can...


The problem you are experiencing tells me that the air switch in the motor most likely the problem.
This is a latching air switch that operates when the button on the side of the tub is pushed.
The replacement TBS-339 air switch is around $21

Rod
US Parts Center

Jan 06, 2013 | Jacuzzi Home

1 Answer

My Jacuzzi Tub won't start


Try compressed air through the system,careful not to use too much pressure. Also you may use another water pump to push water through system and free up the motor. The easiest thing may be to get a new motor though.

Dec 10, 2012 | Home

2 Answers

When I push the button on my american standard jacuzzi tub I hear the hum of the motor but jets don't come on


In my case I took the motor out and used a screw driver to turn the impeller in the front of the pump and the fins inthe back. Put it back together and it worked. I then used 2 tablesoons of dishwashing detergent and 1/2 cup bleach and ran it for 20 minutes to clean and degrease the impellers

Jun 30, 2012 | Jacuzzi Fuzion Whirlpool

1 Answer

I just bought a home that has a 3 year old white Jacuzzi Cetra H526 000 Whirlpool Jetted tub. It was not well maintained. I need 4 new Thermo Pro Jets, 2 Accu Pro Lumbar Jets, a square grille,and a product...


Jacuzzi Cetra Comfort Bath home page:

http://www.jacuzzi.com/baths/options/models/cetra

Installation and Operating Instructions:

http://www.jacuzzi.com/admin/files/files/4cfd8269-e7b0-4286-9908-7b9743.pdf

For replacement parts your best bet is to you use the on-line dealer locator:

http://www.jacuzzi.com/baths/pages/dealer-locator

or you can shop on-line from one of their authorized retailers; however did not see any of the parts you are looking for at the sites I checked:

http://www.jacuzzi.com/baths/pages/buy-online


Mar 17, 2011 | Jacuzzi Home

1 Answer

Our jacuzzi is almost regular tub and has tow metal buttons, one on the top/edge and the other near jet mouse at the middle level of bath tub. We have not used our jacuzzi for 10 months. Even we only use...


The metal button on the top of the tub is used to turn the tub on/off. the metal button you see in the middle of the tub above one of the jets is the low water sensor.
the water has to be above that metal tab, you have to be in the tub and then touch the metal button on the top of the tub to turn it on.
this system uses the electrical current from our bodies to complete the circuitry and turn it all on and off.

Feb 12, 2011 | Home

1 Answer

We've had a whirlpool tub with jets for 2 years. About a year ago, the jets stopped working--i.e. you push the button and nothing. Whe have it hooked up to one of those cool water circulator things that...


check behind the access door for a air tube that goes from motor switch to button if either side has come off you have to re attach it just cut off 1/4 inch of the tube before you do. that will make it fit tighter

Jul 20, 2009 | Jacuzzi - Bathtub - Alcove - Navona -...

1 Answer

Black come out the jets when first operating them


Didn't fully drain at the end of last year, that gunk was mold, rust and gunk that's been sitting in the piping since last year. Not really a problem just remember to take a closer look at the plumbing on your tub next year and get all of the possible places that water may hold drained completely.

May 25, 2009 | Whirlpool 5' Jacuzzi Tub Bathtub Cetra...

1 Answer

Jacuzzi


you have to call the maker of your unit because the gasket can start leaking if you use the rong kind of cleaner

Dec 12, 2008 | Maax Studio 1-Piece Hydromax Whirlpool Tub...

Not finding what you are looking for?
Home Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

Mike

Level 3 Expert

4340 Answers

john h

Level 3 Expert

12650 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...