Question about Insignia Televison & Video

2 Answers

I have an insignia ns-39d310na15. The power LED comes on however the TV does not. The LED does not blink and holding the POWER button down for 60 seconds does not either

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Insignia Master
  • 8,071 Answers

Appears that you have power supply issues.

Posted on Jan 01, 2017

Testimonial: "This TV does not have a power board. I checked some of the leads and 123V comes into the board and in some areas that I could understand have 12V DC, which was labeled. I was going to buy the board just to see, but wanted to see if there was something else to try. There are only 3 boards in this TV, the menu board, the main board, and then a small board at the bottom of the tv."

  • 5 more comments 
  • Paul Intoppa
    Paul Intoppa Jan 01, 2017

    thanks

  • Paul Intoppa
    Paul Intoppa Jan 01, 2017

    "This TV does not have a power board. I checked some of the leads and 123V comes into the board and in some areas that I could understand have 12V DC, which was labeled. I was going to buy the board just to see, but wanted to see if there was something else to try. There are only 3 boards in this TV, the menu board, the main board, and then a small board at the bottom of the tv."

  • richie46 Jan 01, 2017

    your power supply is on the board that is directly connected to your power source.

  • Paul Intoppa
    Paul Intoppa Jan 01, 2017

    OK. Does replacing the board sound like a good start in trying to fix this issue? I think they are available for about $25.

  • richie46 Jan 01, 2017

    Yep.

  • Paul Intoppa
    Paul Intoppa Jan 01, 2017

    Thank you!!!

  • Paul Intoppa
    Paul Intoppa Jan 06, 2017

    replaced board today...ALL is GREAT..>Thanks again Richie46

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Insignia Master
  • 708 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Insignia ns-55l260a13 does not power on. Power led blinks 5 shorts, pause, 2 shorts and stays on. Screen blinks and nothing else happens afterwards.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Nov 23, 2016 | Ideal Sales New Insigniatm - 55 Class -...

1 Answer

I have a insignia tv thats the screen is no good but i want to save the led back lights but i dont know how much power is needed to run just the back lights NS-39D310NA15 Rev.B


You'll need the LED driver circuits to operate the LEDs outside of the TV. Sometimes they reside on the main board or the power supply board. Some models have a separate board. Follow the wires from the LEDs back to see which one you have.

Feb 15, 2016 | Insignia Televison & Video

1 Answer

How can I get a manual for NS-40D510NA15


Insignia has the manuals for most of their products on the product page. Click on the Support/Downloads tab. For the NS-40D510NA15, see http://www.insigniaproducts.com/products/televisions/NS-40D510NA15.html . The direct link to the User's Guide (as a PDF) is http://www.insigniaproducts.com/cms/documents/manuals/NS-40D510NA15_14-1088_WEB_V3_ENG_Final_lr.pdf . There is additional documentation available and there is an HTML version of the user's guide as well.

I hope this helps.

Cindy Wells

Feb 01, 2016 | Insignia Solutions Original INSIGNIA TV...

1 Answer

I press the input button and cannot schroll down to HDMI


Try a different hdmi cable. If it does not detect a device hooked to the hdmi it won't let you select it

Jan 09, 2015 | Insignia Solutions NS-39D310NA15 39" LED...

1 Answer

Led power light comes on but screen will not come on.


"Blinks a few times" implies the TV is flashing a fault code at you. If you can find a service manual for your model, count the number of blinks and look it up in the diagnostics section.

However, the most likely problem is a burned-out electrolytic capacitor in the power supply. These are usually easy to identify visually; the top of the can-shaped capacitor should be flat, but may be bulged out and may have brown or black material leaking from the vent scores. The photo below shows a bad capacitor to the right of a good one; both have black plastic sleeves.

If this is the case, replacement capacitors are relatively cheap. However, you should look for the following criteria in choosing a new part:
>Capacitance (uF): same as the original, or 10% higher if the original value is not available
>Voltage: same or higher
>Temperature: Maximum temperature should be same or higher
>Physical size: should fit in the space occupied by the original; if buying a taller unit, make sure it will fit when the back cover is reinstalled, and make sure the capacitor will not touch heat generating parts such as heat sinks, resistors or large transistors.
>Ripple current: get the highest available without compromising too much on endurance. Ripple current may be specified in mA or A; 1 A = 1000 mA. Sometimes you can get a better rating by going to a higher voltage part, but physical size may be a limitation.
>Endurance: Try to get 8000 hours or better.

I usually use Panasonic FR1 series capacitors, although United Chemi-Con EKZN capacitors are also worth a look. 25351068-tkog3zu3xmxabptjkcidpctj-1-0.jpeg

Jan 02, 2015 | Insignia Solutions Original INSIGNIA TV...

1 Answer

Where?


power button is the little nipple between the phone and play/pause pictures on right side. You hold down for 2 seconds until blue light comes on to turn on.
Too shut off hold down button 4 until red light comes on.
if want too pair with device hold button down 6 seconds until light blinks blue red
pass code is 0000

May 15, 2009 | Insignia Bluetooth Wireless Headphones...

2 Answers

Insignia ns-lcd37 remoe codes


Samsung DVD player codes: 20490, 20573, 21932, 21075, 20820.

With device turned on press DVD button on insignia remote then press and hold setup until the red led light blinks twice. enter code and it should blink twice again. press power button to check if code took. If not, try another code.

Oct 29, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...