Question about Televison & Video

1 Answer

My television picture is frozen on one station and I hear the station I changed to

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,611 Answers

Try a reset to this set, and then check. If it do not help, check and replace its main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Posted on Jan 01, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn it on i hear sound but no picture can hear sound for about 15 sec then it turn off on its own then the timer standby lights 10 times and continues to blink 10 times then short pause then ten...


Usually when a TV starts producing sound but no picture a couple of faults can be attributed to it.
Least among these causes is the contrast or brightness. If either of them has been set to the lowest then you would get volume but no sound and if the channel has been changed to another station with no station then the blinking is bound to happen.
In another scenario if the picture IC in the unit has blown then you have to refer the unit to an expert to fix it. But be rest assured that the blinking lights are as a result of the TV being on a station with no reception.
Hope this solution has been helpful?

Sep 24, 2010 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Sound but no picture. lost owners manual ,it changes channels . i can hear different stations. nothing comes up, no menu, display, set-up.


Ur LCD inverter board it dead.Must replaced to get picture back.It a long board must replaced,tries Shopjimmy.com,Ebay.com for part.

Jan 16, 2010 | Supersonic SC-125A-BK 20 in. LCD TV

1 Answer

Screen is frozen on with no picture and no sound. Does not respond to either remote control or manual controls. The tv did work and then after a few minutes went frozen.


You need to move further south if it is frozen. It's cold up north :-)

If you've pulled the power from this tv (power cycled it) and it still has this problem ... frozen with no picture and no sound. How a screen can be frozen with no picture, I'm not sure. But it sounds like you are going to be on your way to the repair shop. Or to buy a new tv.

If I couldn't see and couldn't hear, how would I know you were even here?

Nov 22, 2009 | Philips 32PFL5403D/27 32 in. LCD TV

1 Answer

Staion stuck on one picture and not responding but other stations


If all other stations are normal, then I believe that it is a problem with the station broadcast or the feed from your TV provider. I don't think you have anything to worry about on your end. It will most likely be all back to normal by the time you see this solution.

Feb 06, 2009 | iLO 3200 32 in. LCD Television

1 Answer

Picture is frozen


There is a button on the lower part of the remote that is a "freeze" button, it will freeze the picture, or capture a still shot. Try pressing this button to "unfreeze" your picture.

Jan 13, 2009 | Akai LCT3285TA 32 in. LCD Television

1 Answer

HD stations have no picture, sound only. Other inputs show picture.


or antenna try ch 5 ch 12 re auto scan the chs in menu again readjust antenna

Jan 29, 2008 | Toshiba 46H84 46" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

Cindy Wells

Level 3 Expert

5052 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...