Question about RC Toys
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: moto frenzy rc bike. fully
I also had this problem during christmas. The bike worked only the first battery then the rear wheel stoped turning. The dissapointment was huge. And I read that there are a lot of people around that have the same problem. So I tried to fix it
The problem was a wire that was wound up in the main gear of the rear wheel. This wire cames from the inside of the bike, so I can imagine that a lot of people will have this problem.
So how to fix it?
It is quite simple to remove the wire parts from the gear. But it is not so simple to open the bike. There are 4 screws but when removing the screws and you try to open the bike it will not open.
The reason is that the gas cap on top of the bike is glued in. So i worked a little bit around of this cap with a stencil scalpel knife. But be careful right under the cap are the wires for the steering wheel. So dont go too deep. Once opened you can easy remove the rear wheel and the gear to find the ugly wire wind up on the main gear. In my bike the wire was directly in the small gear on the main motor. It took a while to remove all parts of this wire.
But once removed the wire the main motor will turn again.
Put all gears in the right places and close the bike.
In my case all things are fine after this repair.
Posted on Dec 29, 2010
SOURCE: I recently purchased a Fast
I have the same one, i have searched long and hard for parts for this without much sucsess, allthough i have found this on ebay, the blades and rotor look very simular
Its slightly diffrent but i think the blades should fit the hawk 4. In the mean time i shall keep looking.
Posted on Sep 21, 2011
I broke the stabilizer off my fast lane G 4 helicopter 1st. day.
I could not find replacement parts.
So i bought a syma s 107 and some spare parts and found out that you can replace the stabilier bar on the G4 with the the spare one i bought for the
s107. All you have to do is shave the hole with a razor blade to make it a little bigger. The wishbone hole for the G4 are a little bigger than they should be for the new stabilier bar so i tied a little pc. of dential floss around them to hold them on and it flies great.
Posted on Jan 20, 2013
Tips for a great answer:
Mar 24, 2017 | Cars & Trucks
Mar 23, 2017 | Cars & Trucks
Mar 23, 2017 | Cars & Trucks
Oct 20, 2016 | Cars & Trucks
Sep 25, 2016 | Toys
Sep 23, 2016 | Cars & Trucks
Sep 05, 2016 | Parrot AR.Drone 2.0 Quadricopter...
Sep 05, 2016 | Parrot AR.Drone 2.0
Sep 02, 2016 | Parrot AR.Drone 2.0
Dec 27, 2015 | Toys
Oct 09, 2017 | RC Toys
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: