Question about The Computers & Internet

Open Question

I have a lock rona collection but i dont have the master code and i would like to program how i can do

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I have the rona keyless

remove all batteries then press any button on the keypad 3 times.Wait 10 seconds then replace batteries.You should hear a long beep followed by a short beep then press and hold the 0 button for 3 seconds. Red LED should flash 3 times and you should hear 3 long beeps. Now release the 0 button. Now enter new Master code (4-12 digits) followed by the LOCK button.You only have 15 secs to do this. LED should flash green once followed by a melody tone. Good luck
Bob...

Posted on Oct 02, 2010

Ad
  • 1 Answer

SOURCE: Bought a electronic deadbolt at Rona (Rona

Rona Electronic Deadbolt Lock Instructions:
Default Master Code:123

Resetting Master PIN:

  • Remove batteries and put them back. You will hear a long beep and a short beep.
  • Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode.
  • Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button.
  • Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.

Adding a PIN:
  • Key in master PIN and press UNLOCK button
  • Press and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds.
  • Release 0 button and you are in the Add PIN mode
  • Within 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep.
  • Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.

Posted on Apr 13, 2011

  • 1 Answer

SOURCE: I bought Rona Collections Electronic Deadbolt. My

You must ensure the deadbolt is in the locked position when attaching the control mechanism. The control mechanism must also be set to the locked position. Turn the manual knob to the left then attach the mechanism (with the batteries) to the flat pin. You can do all of this with the door open, so you can enter the codes. My initial install created the same issue. It worked properly out of the package, so that meant that I screwed something up. You don't need to return the item. Just do a little fault finding.

Posted on Dec 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Authorize code for adobe master collection cs3


Contact Adobe via the program and they will give it to you.

Jun 11, 2016 | Adobe CS3 Master Collection 3 Mac 1U...

1 Answer

Reprogram master code


on the keypad press the following...
(old master code) wait for green light
press and hold AL key until multiple beeps are heard. this puts you into program mode.
TO ENTER NEW MASTER CODE press the following keys:

  • AL 1 AL (new code) AL (confirm new code) then press the star key
  • to EXIT program mode hold down any key for 3 seconds
  • test new master code

Jun 23, 2014 | Trilogy Alarm Lock T2 TRILOGY® Digital...

8 Answers

Adobe Creative Suite 3 Master Collection Authorization code needed


I have Adobe Creative Suite 3 Master Collection and need the Authorization code. My serial number is 1325-1164-8142-5014-6460-3938. My Activation Number is 3636-7118-4382-9860-8883-4470-5727. Please can someone help. My email address is saravanaprakash.sp@gmail.com@yahoo.com.au

Jun 09, 2012 | Adobe Photoshop® CS3 Extended Full Version...

2 Answers

I bought Rona Collections Electronic Deadbolt. My problem is when my door is locked and when you pressed padlock button without entering your pin code the door will unlock. Any solution to this problem?...


You must ensure the deadbolt is in the locked position when attaching the control mechanism. The control mechanism must also be set to the locked position. Turn the manual knob to the left then attach the mechanism (with the batteries) to the flat pin. You can do all of this with the door open, so you can enter the codes. My initial install created the same issue. It worked properly out of the package, so that meant that I screwed something up. You don't need to return the item. Just do a little fault finding.

Sep 19, 2011 | Deadbolt Electronic Keyless System -...

1 Answer

I have a Rona keyless lock with two fob remotes which I cannot get to work. The master lock works fine. There also is reference to step 14.2 in the instructions but there is none in the booklet with that...


I've located a number that you can call for RONA customer service:

1-866-283-2239
8 a.m. to 8 p.m. (Eastern Time)
Monday to Friday

I believe this is the link to RONA where you find your lock featured for sale:

http://www.rona.ca/shop/~deadbolt-digital-deadbolt-rona-collection-253947_locksmithing-accessories_rona-product-line_shop

Unfortunately, there is no downloadable instruction manual to download, ETC., so call the number and begin the process--I hope you get an answer without too much telephone runaround!

Good luck!--and please give feedback if this helps you toward a solution.

Sep 07, 2011 | Deadbolt Zurich Digital Keyless Remote...

1 Answer

I am trying to reset the password for the Rona deadbolt but cant find my manual. i need the steps


I looked for a Rona manual.

The Rona website has advertisements for air-travel miles, so I guess the page doesn't have enough space to show product manuals.

The descriptor-page uses 99 words to describe the digital deadbolt in tiny print so there is no clue as to the operation of the product. Maybe they do that so you have to buy another deadbolt to get the instructions.
There is a 'contact-us' page that lets you fill out your personal information to share with them so you can receive further run-around. But wait, the form doesn't work because it doesn't accept postal codes. Wow, but there is a phone number 1-866-283-2239
https://shop.rona.ca/member/customer-service

Best of all, the Rona website solicits their customers to become a dealer for this poorly represented product.

Oct 20, 2010 | Deadbolt Locks & Locksmithing

1 Answer

Bought a electronic deadbolt at Rona (Rona Collection). Installed it and i can open/close it with the remote control or a key. Can't open it by entering a code. I thought the factory code was 1234, but...


Rona Electronic Deadbolt Lock Instructions:
Default Master Code:123

Resetting Master PIN:
  • Remove batteries and put them back. You will hear a long beep and a short beep.
  • Press and hold the 0 button until you hear 3 long beeps and the LED flashes red for 3 seconds. You are now in program mode.
  • Within 10 seconds, key in a new master PIN (up to 12 digits) and press the UNLOCK button.
  • Key in the master PIN again and press the UNLOCK button. The LED will flash green for 1 second and the resetting is complete.

Adding a PIN:
  • Key in master PIN and press UNLOCK button
  • Press and hold 0 button until you hear 2 short beeps and the LED flashes for 3 seconds.
  • Release 0 button and you are in the Add PIN mode
  • Within 10 seconds, enter a new PIN and press the UNLOCK button. You will hear one beep.
  • Key in the new PIN again and press the UNLOCK button twice. When the LED stops flashing the PIN has been added.

Sep 23, 2010 | Deadbolt Locks & Locksmithing

1 Answer

I have the rona keyless entry lock (with single numbers on the front to enter our code.) For some reason, I cannot get it to change the code and have since lost my instructions. Can you please tell me...


remove all batteries then press any button on the keypad 3 times.Wait 10 seconds then replace batteries.You should hear a long beep followed by a short beep then press and hold the 0 button for 3 seconds. Red LED should flash 3 times and you should hear 3 long beeps. Now release the 0 button. Now enter new Master code (4-12 digits) followed by the LOCK button.You only have 15 secs to do this. LED should flash green once followed by a melody tone. Good luck
Bob...

Sep 07, 2010 | Directed Dei Valet 561r Remote...

1 Answer

Have a Rona electronic lock (Weiser) and the key works... will lock electronicly... but do not know the code... I have removed it from the door and replaced, but is there a way to reset the code?


First, I fix this problem after an hour of try.

I conclude that this dorr lock is better that is appear. Is not a 2 codes door lock, it's a 3 codes one.. and the problem you have is the third code not reset. You can put the same code in each third emplacement. you have just to press the program button 3 time for the third code...

I determinate that I put the third code by error the was i program it the firs time.

;-)

I guide you...

  1. To program the first code, press the reset button once, then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad. You will hear a beep. This signals that your code has been accepted.
  2. To program the second code, press the reset button twice , then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad. You will hear a beep. This signals that your code has been accepted.
  3. To program the third code, press the reset button 3 time, then enter your 4-8 digit code on the exterior keypad, then immediately press the middle lock button on the exterior keypad. You will hear a beep. This signals that your code has been accepted.

Jan 23, 2010 | Weiser Lock Powerbolt 1000 Lock

2 Answers

Trilogy dl 2700 serries digital lock program managers code


First you need to know if you have a standard 2700 or the new enhanced version, it makes a big difference. Press any 2 buttons then star, if you get no response it is a standard version, if it beeps several times it is the new version. If it is the standard version, disconnect the battery and press any button. Now you are at factory default. Reprogram the master code, remember the master code and the operating code must b e the same length. 12345 A 1 A new master code A new master code. The master code is the only code that needs to be entered twice during it's programming. To set a manager code press; master code A2A new manager code, to set a new user code; enter master code or manager code A11A new user code. The programming must be done during the lock's unlock window so write down the procedure you intend to use to make things go quicker, if you need more time you can change the unlock window, it is probably set at the factoy 5 seconds. Press master code A45A4, this will give you a 20 second window to program the lock, when you are finished change the lock back to 5 seconds, press; master code A45A1, keep the open window short to conserve batteries.

Feb 18, 2009 | Trilogy Alarm Lock T2 TRILOGY® Digital...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top The Computers & Internet Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1828 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

thetraveler

Level 1 Expert

36 Answers

Are you a The Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...