Question about Televison & Video

1 Answer

My Seki 55inch flat screen will not turn on. We have tried with multiple outlets. It is definitely receiving power. is there an internal fuse that needs to be reset?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Televison & ... Master
  • 6,694 Answers

Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Posted on Jan 01, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

First my seki remote would not change the aspect then I unplugged it now with power restored it won't turn on at all

If your TV will not turn on directly, not using the remote, an internal fuse may have opened or there may have been spontaneous power supply failure.

Feb 26, 2017 | Televison & Video

1 Answer

My lg 55inch tv won't turn on

Open internal fuse or power supply failure

Feb 09, 2017 | LG Televison & Video

1 Answer

I have a Sony TV model number KDL-46VE5 it doesn't turn on, there is no red power light when I plug it in and I have tried several outlets, can u help me figure out what's wrong with it.

check the fuse inside the power plug
check for any internal fuses blowing.
If these are all right it is probably something to do with the power supply to it.
Using a multmeter I would check that the set is receiving power. Next, if power is reaching I WOULD CHECK FOR DAMAGED CONDENSERS/ CAPACITORS ON THE POWER CONTROL CARD....SEE LINK BELOW FOR POSSIBLE REMEDY

Jun 17, 2015 | Sony Televison & Video

1 Answer

My tv is not getting any power no lights turn on

try your tv in another part of the house and if it dos not work then the internal fuse may be gone

Feb 18, 2014 | Element Electronics Televison & Video

1 Answer

No power when plugged in

If it is new take it back or read the manual. If it is second hand, then you may want to check to see if the internal fuse is intact. These power speaker units usually have an internal fuse to back up the one in the mains connector.

Apr 19, 2013 | Pyle PPHP153MU 15 1000W Powered Speaker...

1 Answer

I have a 46" Flat Screen TV. Model Number

First thing you do is to check the outlet if there is a power output the check the power cord and plug.If there 's a power in the power cord,Check the fuse of your television.The fuse is located at the power supply.You can see the power supply when you open the back cover of your television at the upper right side.Replace the fuse if busted with the same value of fuse.That's the step you can do first..Thanks..

Aug 25, 2011 | Televison & Video

1 Answer

12v outlet fuses keep blowing.

Faulty reciever ,,, Worth checking the plug assy for internal damage . Check that the sat receiver is within the power capabilities of the vehicles acessory plugs < 10amp .

Dec 23, 2009 | 2004 Ford Ranger

1 Answer

Power supply gone bad

Canon 9080C is a very good scanner, so dont dump it.

Yes all power supply units have a fuse. Check if it is okay. You can source scanner power supply board from the market, if you can handle it or it is easy to call Canon support and get it fixed.

Oct 11, 2006 | Canon DR-9080C Path-Through Scanner

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides