Question about Philips Televison & Video
¡Hola amigo su problema es exclusivo del control remoto de su tv al parecer esas teclas ya no le funciona valla al panel del tv si ah? no le funciona tampoco yo le recomendar?a revisar el panel del tv presione en su control el mute si trabaja el sonido de su tv esta bien si el volumen continua fijo despu?s de revisar el panel y este estar funcionando bien entonces es un problema de la m.b del tv o sea la placa principal a veces una falsa soldadura es todo el problema espero q resuelvas tu problema..
Posted on Dec 31, 2016
Testimonial: "thanks but i can not read ..."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You most definately have bad capacitors in the power supply. try and get it repaired as soon as possible, not an expensive repair that iv'e seen.
Posted on Feb 04, 2009
Contrast: 53 Brightness: 56 Color: 45 Tint: 2 Sharpness: 2
Color temperature: Off
Dynamic contrast: Off
Digital Natural Motion: Off
Color enhancement: Off
Active control: Off
Posted on Mar 03, 2009
SOURCE: 42" Vizio - no picture no sound
If the TV goes in standby, then it is in protection mode.
Ensure also that the fault is not coming from a faulty receiver box sending
bad signal, check if you get same problem on DVD with no receiver box
Try first leaving the TV power cord unplugged for some times, let say one hour or so.
The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible causes.
1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.
2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , starting the flashing light.
If you are in situation one, then the TV will reset just unplugging power cord for one or two hours,sometimes even minutes.
If you are in situation 2 , then there is an internal fault.
If under warranty contact the manufacturer ringing the number on the user manual
If you want to repair at your own expenses, just locate any good qualified repairer.
If you want to DIY you find parts here,
All: Appliance parts, electronics parts & more from PartStore.com
Encompass Parts Distribution
LCD/Plasma Electronic Replacement Parts: Plasma & LCD TVs, Appliances |
On LCD Pay particular attention at inverter and power board, power board can be inspected looking for bulged or leaking capacitors, then tested with a multimeter. The inverter is more difficult to test , there is need to read voltages, should be done by a tech. Also the LCD controller board can cause same problem
Posted on May 04, 2009
Your tv is being attacked by electrical surges which seem very violent and has already damaged some logic controls. Please invest in a AC filter which will protect your tv from such spikes....... but first you need to get your tv serviced from the electrical damaged it has already suffered.
Posted on Nov 03, 2009
Tips for a great answer:
Sep 19, 2016 | Philips 42PFL3603D/27 42 in. LCD TV
May 23, 2016 | Philips 42PFL3603D/27 42 in. LCD TV
Nov 29, 2013 | Philips 42PFL3603D/27 42 in. LCD TV
Oct 07, 2013 | Philips 42PFL3603D/27 42 in. LCD TV
May 24, 2012 | Philips 42PFL3603D 42 in. LCD TV
Feb 16, 2011 | Philips 42PFL7422D 42 in. LCD TV
Sep 16, 2010 | Philips 42PFL3603D 42 in. LCD TV
Mar 13, 2010 | Philips 42PFL3403D 42 in. LCD HDTV
Jul 27, 2009 | Philips 42PFL3603D 42 in. LCD TV
59 people viewed this question
Usually answered in minutes!