An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
An expert whose answer got voted for 20 times.
Re: I am looking for a manual for remington pole saw,...
Here is a link to the instructions to replace a chain and tension it properly... http://22.214.171.124/manuals/113556-01A.pdf. Here is a link to the owner's manual you requested... http://126.96.36.199/manuals/108539-01L.PDF . If your chain is new they will stretch quickly during their break-in period and will have to be tightened frequently. Once they have been used for a while they will not have to be tightened as often. Sometime if you also need stech and fall off quite a bit. If you need a replacement chain (8SC), you can find them oline at www.masterparts.net. Also, if the guide bar nuts are not tightened securely the bar will not remain in adjustment. Make sure that the guide bar bolts are tightened. I hope this helps!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remington Pole Saw Carbon Brushes
If you're Remington Pole Saw is slowing down, throwing sparks, or not starting you may need to replace the carbon brushes. Replacing brushes and cleaning commutator early can prevent damage to motor armature!
Remington carbon brushes on E-bay Search for:
Remington Pole Saw 8 AMP Carbon Brush
I bought this chain without first examining the "count" of my old chain. I found this new chain had 39 drive-links while my OLD chain had 40 links. My 10" Remington saw had enough chain-tensioning adjustment to compensate for that missing link and this new 39-link chain runs fine... cuts very well. Happy.
more details Pole Saw
Your manual can be found here: Remington.com http://shoppingcart.msservicecompany.com/Default.aspx • Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search. • Click the “YourModelNumber” - Remington Electric Chain Saw "View Model" link. • Click “View Owners Manual” or "View Illustrated Parts Diagram" link. • Type "YourPartNumber" into the “Search for your parts by Part #:” window, then click search.
If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck. Lou Thank You for using FixYa.
Type "YourModelNo" (RPS96) into the "Model #:" window, then click search.
Click the YourModelNo - Remington Electric Chain Saw "View Model" link.
Click “View Owners Manual” or "View Illustrated Parts Breakdown" link.
There are 8, 10, 12 and 14" chains on the IPB depending on the actual model pole saw. RemingtonPower is no longer in production, and parts are often difficuilt to find. All 4 chains listed are available and range form $12.92 to 15.95 plus shipping and handling. You can take your saw (or just the chain) to a local saw outlet and have one fabricated in about 5 minutes. It is rarely more expensive at a local outlete and you save shipping and handling fees. HTH Lou
The chain has to be tensioned when replaced. You lift the chain away from the bar about halfway and the tangs that run in the bar should just almost come out of the groove. There is a screw that extends the bar near where it attaches near the sprocket. adjust that with the bar mounting nuts not quite tight till the chain is tensioned correctely.
While Bar Chain oil will probably work, the owners manual (sitting in front of me) on page 9 says to "use SAE #30 motor oil". This is the owners manual for Models: M12510US, M15012US, M15014US, M15014AS, M30016US, M30016AS, M30016AW, M35016UW, M35016AW. Remington Electric Chain Saw