Question about GE Televison & Video

1 Answer

I have a GE stereo monitor TV with no remote. I keep manually going to setup and channel to try to set the TV with the DVD player on S-video input but it still isn't working. The DVD player is SAYNO

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GE Master
  • 73,710 Answers

Without a remote control, you can't select the TV's inputs. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Posted on Dec 31, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: how to access the video input channel for my Konka tv?

press menu twice and once + or - volume. and tv will enter in video imput mode.

Posted on Apr 08, 2009

Manutd777
  • 30 Answers

SOURCE: video input

If there is no input button on the tv itself to change the input then you will most likly need a remote. so you can get a universal remote and follow the instructions to adapt it to your set then you can use it to change the input. (you can get a universasl remote for like 10$) hope it helped

Posted on Aug 24, 2007

  • 104 Answers

SOURCE: Can't find the input/video channel for my Emerson TV

universal remotes are tricky, if you have the pamphlet, often times there are several codes for each brand. you have to try all the emerson codes for your universal even tho the power, volume and channel functions may work with several emerson codes, some of these specialized buttons (like input) may only work on your TV with one specific code.

also, if there are any unlabeled buttons on the universal try them with each new emerson code.

Posted on Feb 12, 2009

  • 2 Answers

SOURCE: RCA model F27252GY TV has no Video button or AUX channel for DVD

try putting the tv on channel 00, that is where this tv apparently shows the input from at least one on the video channels.

Nancy

Posted on Mar 01, 2009

SOURCE: I have A Durabrand DWT1905 with a universal

You need a "tv/video" or "input select" button.
Alternatively, you can use a VCR to send input signals to channel 3 or 4.

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I watch a dvd movie on tv? I have the dvd


press the av or au bullon on remote until you get to the dvd "channel"

Feb 11, 2010 | GE 19GT243 19" TV

1 Answer

RCA Colortrak Stereo Monitor won't play DVD/Nintendo


The way you describe having your TV/DVD connected you wont see the picture in the regular channel line-up.
You will have to tell the TV to to switch to the video input. This is usually done by navigating the menu to the "input" and selecting video 1, video 2 etc
Failing that try changing to channel 00 ( just type 00 in remote)
Some sets will allow you to type in 02 and then hit the channel down button on the remote.

If you have the user manual it will give you the exact steps you need to take.

Mar 13, 2009 | RCA F26317 TV

3 Answers

Video mode on GE 27GT610


Try hooking up the dvd player and turning it on. Then use the setup and add/erase channel feature to look thru all of the channels. On my older GE tv I found that channel 91 was the correct channel for the video input. I saw the logo for the dvd player on this channel. I just added that channel and now it works. Your channel might be different.

Feb 22, 2009 | GE 27GT616 27" TV

2 Answers

Switching Input on GE Stereo Monitor


I tried for a while to get my dvd to work. I went to the menu, from my universal remote that totally works. Went to the menu, then channel set up, and switched the VCR1 channel to 00Enabled. When I want to watch a dvd I press 00 for my chanel and it works. I hope this helps all of you.

Dec 13, 2008 | Televison & Video

1 Answer

No manual to figure out how to configure video settings for games


It's March 30, 2009 and I just tried hooking this same tv up with the DVD player. No remote and was ready to throw the TV out the window. Another question on this same site helped me figured it out. There is no input button. You have to plug the DVD or video system in and then go to channel 91. That's the default channel for input 1. Strange but it worked.

Dec 13, 2008 | GE 25GT240 25" TV

2 Answers

RCA F25645 25in TV.


I have this same TV. The DVD player is either hooked up to the video or s-video input. Go to the Menu (either through the remote or from the front of the TV) and select the Setup option. Go to the part where it asks if you want to use a DVD player. Select yes. Then select Video Input. Exit the Setup. When you hit the DVD button, it will switch to the Video input. The second step is to go into the Menu and select Channel, then go to Video Input Source. From there, select which input you are using for your DVD player, the S-Video or the standard Video (yellow composite cable).

Mar 06, 2008 | RCA F25645 25" TV

2 Answers

Am I connecting DVD player wrong?


on some of these older RCA try simply tuning it from the remote down to chanel 01 or 00 this may work. if not you have to go into the setup menu of this set and enable the aux inputs

Feb 19, 2008 | GE 25GT240 25" TV

1 Answer

Input problem


If you have the original remote, hit video, source, or input button, if it dont have them, then try to change the tv to channel 00 (zero or zerozero), if not then the channels might have to scroll to it, from channel 02 down to make it loop, if it goes to the next highest channel, then you need a remote. It may be set in the menu options to have the video source not saved to your list of saved channels. when you scan the channels, the tv might not look for the A/V source (audio / video), maybe just the RF source. The 3 DVD RCA wires are 1 video and 2 stereo, one stereo for left and one stereo for right. The TV has only 2 , 1 for video and 1 for mono 1 channel sound. This wouldnt have anything to do with why you cant use the DVD player. but try that with the original remote (or a universal remote that is set to your tv set that has either video, input, source or something similar. It is what tells the tv to change from the cable source (RF) and the AV source (the Red White and Yellow plugs, in your TV's case, 2 plugs, one yellow and the other either red or white or something). Dont really know how to explain it much more but hope it helps.

Jan 05, 2008 | Sanyo DS24205 24" TV

1 Answer

Video input


If there is no input button on the tv itself to change the input then you will most likly need a remote. so you can get a universal remote and follow the instructions to adapt it to your set then you can use it to change the input. (you can get a universasl remote for like 10$) hope it helped

Aug 24, 2007 | GE 31GT660 TV

2 Answers

I can't get my DVD to play on my GE 25GT240 25" TV


I'm not sure, but, if you use the channel down button on the television (below channel 2), the set may go to the video inputs. If not a local retailer should have an inexpensive universal remote that would work on this set and have an input or tv/video button. If you use a cable box, the remote can be programed also. If you need more help, reply to this post and I can come up with more solutions when I get to my shop next

Aug 11, 2007 | GE 25GT240 25" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...