Question about Dynex Televison & Video
The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
Posted on Dec 30, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Dynex tv model number DX-40L261A12 tv will not come on at all I unplugged it to try and reset it but it won't work. The red power light is on but every time I push the power button it does nothing
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Posted on Apr 25, 2016
Tips for a great answer:
May 27, 2017 | Dynex Televison & Video
Oct 11, 2016 | Dynex Audio Players & Recorders
Nov 21, 2015 | Dynex Televison & Video
Mar 01, 2014 | Dynex Original DX-RC02A-12 LCD LED TV...
Oct 15, 2013 | Dynex DX-L42-10A 42 in. LCD TV
Jan 11, 2013 | Televison & Video
Jul 04, 2012 | Innovage Jumbo Remote Control
Nov 15, 2010 | Dynex 32 in. LCD Flat-Panel HDTV
Apr 22, 2009 | Dynex DX-LCD32-09 LCD TV
Jan 19, 2009 | Dynex DX-LCD37 TV
29 people viewed this question
Usually answered in minutes!