Question about Ricoh Aficio Mp4500 Mp3500 Cl7000 Ap3850c Ap3800c Ap3800 3045 3035 2045 2035
In starting of machine the the error code show in the panel
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: RICOH 2015 error code sc 500
Main motor/ transport motor lock/ fusting motor error.
The only thing you can do is check for any obstructions in the machine.
That needs to be looked at by a service because the problem could be a motor, a pcb, or a power supply.
It can be a lot of troubleshooting to do.
Posted on Oct 19, 2008
To reset error, enter SP mode by pressing: Clear (yellow) button, 1 0 7, and press and hold the Stop (orange) button for 3 seconds then switch off and on the copier.
If the error is still there, please check the following in the fuser unit;
Posted on Mar 02, 2009
SOURCE: Ricoh fax error #400
Possibly the fax line is open (busy). Try ringing the fax number, see what you get. Try unplugging the fax and plug a normal analogue handset into the line. See if you are getting a dial tone.
If not, then the cabling or line are faulty. Talk to your carrier. If yes then replace the cable on the fax (if possible) or have it looked at.
Posted on Mar 04, 2009
SC870 = Address Book Data Error. This is most likely a hard drive failure especially considering the power loss. This is about a $175 repair in case you want to call around locally and get estimates to replace the drive. There is an outside chance you can get someone to walk you thru the Service Mode and do the following to reload the address book:
1. Enter the SP mode
2. 5846-50 (Initialize All Address Book)
3. Turn the machine off then on again.
Posted on Oct 20, 2009
Try to reset the machine by turn it off and after 5 second turn it on again by the red switch-plug which is located on the left side in the middle.
If this do not help you will need to cal a technician because the machine have problem with the laser unit.
Please answer do this is helpful.
Posted on Jan 13, 2010
Tips for a great answer:
Mar 06, 2017 | Office Equipment & Supplies
Oct 23, 2015 | Washing Machines
Aug 01, 2014 | Washing Machines
May 14, 2014 | Minolta DiALTA Di183 Copier
Apr 22, 2014 | Xerox Office Equipment & Supplies
Apr 22, 2013 | Office Equipment & Supplies
Oct 13, 2011 | Kyocera Mita KM-2550 All-In-One Laser...
Aug 28, 2010 | Xerox Workcentre 5225 / Copier, With...
Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...
Jan 02, 2008 | Panasonic DP-150A Copier
520 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: