Question about Hisense Televison & Video

1 Answer

I have a hisense 50 tv I lost power for abount 5 min when power came back up the tv will trun on is there a reset button

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hisense Master
  • 6,694 Answers

Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Posted on Dec 30, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset a hisense tv


  1. Press the 'Input/Source' Button.
  2. Press '2, 5, 8, 0' on the keypad of the remote.
  3. Scroll down to "Reset All" and press "OK".
  4. Select "Yes" and press "OK".

Feb 24, 2018 | Hisense Televison & Video

1 Answer

Is there a reset?


An internal fuse may be open

Nov 02, 2017 | Hisense Televison & Video

2 Answers

On my Hisense 50K23DG LED TV, I have sound but no picture.


LCD & LED TV Repair - No Image & Blank Black ... - YouTube

? 5:56
https://www.youtube.com/watch?v=xUzCLgoSPGM
Sep 15, 2014 - Uploaded by ShopJimmy.com
LED & LCD TV How to Diagnose Symptom of No Image on the Screen CLICK HERE to BUY ... I have an LG ...

Hisense 50K360G has audio no video will not turn on logo ...

? 1:48
https://www.youtube.com/watch?v=xI3MpZukKm0
Nov 20, 2013 - Uploaded by After Hours Tv & Pc repair
Find the correct TV part for your TV and more at ShopJimmy.com Click Here: http://bit.ly/ShopJimmy6 Want to ...

All comments on LCD & LED TV Repair - No Image & Blank ...

https://www.youtube.com/all_comments?v=xUzCLgoSPGM
I have sound and picture but no backlight. .... how do you replace the back lighting on a led lg tv? ... I have a 42 inch LED LCD combo DVD TV made by RCA.

My LED TV has sound, but no picture. - Tom's Guide

www.tomsguide.com/answers/id-2771720/led-sound-picture.html
Dec 28, 2015 - Hi, I have an RCA 32" LED 1080p TV that is less than 2 years old, and it has already lost the video. I can hear sound, and I can see lights in the ...

53 HISENSE complaints and reviews @ Pixxed Consumer

hisense.pissedconsumer.com/



Jan 13, 2016 | Hisense Refurbished 50"" 1080p LED-LCD...

2 Answers

My hisense 50 inch lcd tv has picture but no sound.


If you still have back light, then the T-con is probably defective. If you don't have back light, then you either have a bad power board/inverter or a defective panel

Mar 20, 2013 | Hisense Televison & Video

1 Answer

Hisense tv wont turn on


follow the power cord inside the set and to begin with look at the fuse which the cord goes to--also inspect to see if puffed up caps in the power supply----see attached photo


4_29_2012_1_44_25_pm.jpg

Apr 28, 2012 | Hisense LHD3204US 32 in. LCD HDTV

1 Answer

My hisense locked and I don't have the original remote


This worked like a charm for me. I used the buttons on the side of the TV, since I've lost the original remote. Good luck! I HAD THAT SAME PROBLEM ALL YOU DO IS HOLD THE MENU BUTTON UNPLUG THE TV AND PLUG IT BACK WHILE STILL HOLDING THE MENU BUTTON GO TO GENERAL SETTINGS AND TURN ON RESET MENU ON FROM THIER AUTO SEARCH YOUR CHANELS NOW U CAN HEAR THE TV BUT BLACK SCREEN NOW UNPLUG YOUR TV FOR A FEW MINUTES PLUG IT IN AND YOUR TV SHOULD BE BACK ON THIS IS THE 3RD TIME IT HAS HAPPEND TO ME IT WORKS

Oct 25, 2010 | Hisense TL1700 17 in. LCD Television

2 Answers

My Hisense lcd is lock.


This is how I got mine to work after weeks of struggling just trying to find a new remote (hisense is really hard to contact....).
1) Turn the TV ON. unplug the tv while still ON 2) hold down the "menu" button on the side of the TV and plug it back in. keep holding it down. the TV should turn on with the menu popping up. use the Vol <> keys and Channel <> keys to navigate the menu. go to the Vchip menu, and play around. I'm not sure what ultimately worked, but i changed the Vchip password to 1111, turned the reset menu to "on" and played around with the ratings settings (turning most of them to "u"s etc).
I went through this process several times and finally, the black background behind the menu turned to static. I played around with the channels, and the TV was unlocked. I turned the TV off, and then on again, and the channels showed up normally (no static). and it was no longer locked. I had to do the unplug thing several times, and was getting really frustrated looking for an "unlock code" in the manual (it just says press the button on the remote. so it was not really helpful).
But really, once you can just get to that menu you've made some progress, and just keep playing around with it until something works.
Best of luck!!

Jun 03, 2008 | Hisense TL1700 17 in. LCD Television

1 Answer

Hisense 42in plasma flashing blue/green pixels after 30 mins


Do a master reset
1. unplug the TV from the wall
2. remove the batteries from the remote
3. wait 24 hrs
4. plug TV into the wall socket
5. install batteries in remote
6. hold power on button for minimum 10 seconds
This was given to me by the Hisense service line and worked for my TV.

Aug 11, 2007 | Hisense TA42P40M 42 in. Plasma Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hisense Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75462 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you a Hisense Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...