Question about Rokenbok ROK Works Construction and Action Set
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: I can`t find my Rokenbok
For manual you need to either call them at 1-888-476-5265 or email them at email@example.com
Instruction to put it together
The black Snap Block needs to be at the bottom of that vertical gray beam that supports the bin boxes. The black Snap Block will then connect to the red block. The red block connects to the half beam (3-blocks in length). The half beam then snaps into the light gray riser. (2- blocks in length but postioned vertically) So your Monorail track should sit a total of 6 block lengths away from the vertical beam that your red and blue bin boxes are attached to
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Posted on Sep 12, 2010
SOURCE: The Rokenbok monorail will not
We had the same issue here. The motor would run but the drive rollers would not move. I took the entire engine assembly apart and determined that the drive gear (pinion) on the motor shaft had slid out and disengaged from the other gear(s). I pushed it down to re-engage it and it works. A spot of glue where the gear meets the shaft seems to hold it in place. Good luck - lots of screws.
Posted on Oct 08, 2012
Tips for a great answer:
Jun 02, 2011 | Toys
Feb 09, 2011 | Monorail (207001011) PC Desktop
Jan 29, 2011 | Rokenbok Rc Fire and Rescue _
Jan 22, 2011 | Rokenbok Monorail Metropolis Start Set by
Dec 12, 2010 | Rokenbok R/C Monorail With Track and...
Nov 26, 2009 | Disney Toys
Sep 18, 2009 | Toys
Aug 28, 2009 | Rokenbok R/C Power Sweeper
May 12, 2009 | 2006 Rolls Royce Rolls Royce Corniche
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: