Question about Measuring Tools & Sensors

Open Question

Excelvan weather station

Cannot receive out door temp on receiver

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

leroyal
  • 2120 Answers

SOURCE: Change setting to not receive faxes at this station

Function 64 set
look for manual mode on the print out
set to manual through sim Function 74 set

Posted on Aug 31, 2008

  • 2 Answers

SOURCE: does not transmit. it has receive and weather

The PLL chip is burned out

Posted on Mar 14, 2009

pgh_pa_guy
  • 2992 Answers

SOURCE: I have a Sony Walkman TV/Weather/FM/AM SRF-M37V. I need to know

The radio won't get TV sound anymore after the switch. And no, nobody is selling a digital receiver for the TV sound yet. All this radio is good for now is regular broadcasting and the weather band.

Posted on Jun 17, 2009

F1xer
  • 415 Answers

SOURCE: After receiving the 2.2 android

A rule to updating firmware is " If It Ain't Broke Don't Fix IT!"
What you can do is roll back the update to the previous edition.

Posted on Aug 12, 2010

  • 1 Answer

SOURCE: Sharp SPC 373 transmittting temp 179 for a month

Unfortunately I have the same Sharp atomic clock with the same bad remote temp transmitter and having the same 179 result displayed. Can't find a replacement anywhere.

Posted on Oct 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put new batteries in Transmitter and never got any temp reading.The unit is less than 2 years old and is not working. Is there anything I can do?


  • Remove all batteries
  • Install new batteries in transmitter
  • Wait for transmitter to initialize and begin transmitting temperature data
  • Install known-good batteries in receiver
  • Observe outdoor temperature reading
If this doesn't work, the transmitter or receiver or both may be defective. I find in very cold weather the transmitter stops sending the temperature.

Dec 08, 2016 | Measuring Tools & Sensors

1 Answer

Outdoor Temperature Transmitter not working


Sometimes, you have to remove all the batteries in the transmitter and receiver and wait a few minutes before the next step.

Then you replace transmitter batteries first and within 30 seconds, get the batteries installed in the receiver. This allows the receiver to link up with your transmitter. Both units need to be reset this way. You'll see the temperature and any other information the transmitter provides come up in a few minutes. This works with my La Crosse weather station. Using the reset buttons without removing power will not work. My nieghbour has a weather station from another manufacturer and this is also the only way that his will link up.

Oct 03, 2016 | Radio Communications

1 Answer

Will not transmit outdoor info. Batteries good- LED lights. Monitor shows indoor temp only.


There are a couple of possibilities for the failure to transmit/receive outdoor data. First, resynch the two units. This will depend on the manufacturer. For some brands, you need to take the batteries out of both the indoor and outdoor units for 10 minutes. Then put the batteries into the devices with both side by side (working inside is easier). Wait until the outdoor data is displayed. There are some weather station systems where the outdoor unit isn't weather-proof. You may need to dry the outdoor unit for several days after removing the batteries before resynching it to indoor sensor.

If the data displays properly when the outdoor unit is inside, you may have the outdoor sensor too far away from the indoor unit. (The distance will depend on the number of walls and the composition of the wall studs/siding.) Try keeping the two units closer together.

If the outdoor data isn't displayed when the two units are side by side and the reset procedure doesn't work. One device has an internal malfunction (transmitter or receiver failed). It's probably best to replace the unit. If it is under warranty, contact the manufacturer.

I hope this helps. For specific details on resetting the indoor and outdoor units to synch them, please add a comment with the make/model of your weather station.

Cindy Wells
(I've seen Davis Weather stations damaged by a close lightning strike. The outdoor unit had to be replaced.)

May 23, 2015 | Measuring Tools & Sensors

1 Answer

Taylor 433MHZ cable free thermometer won't show outdoor temp


Check battery in outdoor sender and reset main unit to receive transmission of data. If nada could be that you have an issue either with the sending unit or the receiving unit of your weather station. Has happened to me a few times already so .................

Jan 22, 2013 | Measuring Tools & Sensors

1 Answer

WEATHER STATION AC100MB stops transmitting outdoor temp


I have experienced the same with numerous different, "quote un quote" atomic clocks! Please don't forget that this sender unit, that goes outside, generates a RF Singal to be received by the clock inside. This unit transmits a signal 433 MHz signal approximately every. 3 minutes, and after so many years the sender unit's RF section(electronics) just goes out or no longer function properly or not at all! The transmitter/sender for this model number, according to "3M" is obsolete and can no longer be furnished, DRATTS !!!!!

Mar 20, 2012 | 3M Measuring Tools & Sensors

1 Answer

My oregon scientific indoor outdoor weather station with atomic clock just stopped picking up the outdoor readings, it won't switch to that channel any longer. tried removing and reinstalling the battery,...


I had the same problem, Since the outside temp wouldn't read, I figured it was the outside unit batteries. Went through half a dozen AAA batteries and wouldn't read. It was the indoor unit. Had the same bats I installed 3 years ago. DUH! Replaced the AAA, and all was well. When the inside batteries die out, it has just enough juice to read indoor temp, but not enought to sense exterior signal.

Oct 20, 2010 | Oregon Scientific Wireless IndoorOutdoor...

1 Answer

Dashes in my outdoor weather reading of Oregon Scientific station


The signals are not being received by the main unit. Try to reposition the unit or move it to a different location. Also make sure the antenna is in the clear and not next to any thing like a cordess phone or charger as these can make RF noise that can block or cover the needed signals.

Feb 07, 2010 | Oregon Scientific Audio Players &...

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

678 Answers

Brad Brown

Level 3 Expert

15557 Answers

Tom Chichester

Level 3 Expert

34089 Answers

Are you a Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...