Question about Televison & Video

1 Answer

Procedure and codes to program my Santo TV to the dish remote

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,383 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts. .

Posted on Dec 30, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Como puedro. Programar. Mi. Tv santo. Con. Un. Control. Dish


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts. ..

Dec 23, 2016 | Televison & Video

Tip

DISH VIP612 Remote Code Scan


DISH Solo DVR VIP612 Remote Code Scan

7c06801.jpg


Would you like to autoscan program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your TV, VCR, receiver, or stereo?


e818a57.jpg

To auto-program device codes into your Dish Solo DVR VIP 612 Universal Remote by searching for the code, follow these steps:

  1. Turn the device you would like to control on.
  2. Press and hold the mode (TV, VCR, or AUX) button until all the other buttons light up, and then let go. The mode button will flash.
  3. FOR AUX MODE ONLY - Press 0 for a 2nd TV, 1 for a 2nd VCR, or 2 for a receiver, amplifier or tuner. Then press the STAR (*) button.
  4. Press POWER to put your remote into scan mode.
  5. Press the UP or DOWN ARROW repeatedly until your device turns off. Each arrow press tries the next code your remote knows for your selected device type. When your device turns off, you have found a compatible code. When the remote runs out of codes to try, the device will flash rapidly eight times.
  6. Press POUND (#). The mode button will flash three times as it stores the found code.
  7. Turn the device back on and try some of the other buttons to make sure they work. If all functions work, your remote has been successfully programmed.
  8. If the code didn't work, repeat this scanning procedure to find a more compatible code. When your device turns off during your next scan, press the arrow key again until the device turns back on to signify you have found the next compatible code.
Your device's remote control codes for your TV, VCR, or receiver are now programmed into your DISH Solo DVR ViP 612 remote control.

(The other way to program your DISH Solo DVR ViP 612 remote control is to look at the tables in back of the user manual, and enter the code directly.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | Televison & Video

Tip

DISH VIP612 Remote Code Scan


DISH Solo DVR VIP612 Remote Code Scan

7c06801.jpg


Would you like to autoscan program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your TV, VCR, receiver, or stereo?


e818a57.jpg

To auto-program device codes into your Dish Solo DVR VIP 612 Universal Remote by searching for the code, follow these steps:

  1. Turn the device you would like to control on.
  2. Press and hold the mode (TV, VCR, or AUX) button until all the other buttons light up, and then let go. The mode button will flash.
  3. FOR AUX MODE ONLY - Press 0 for a 2nd TV, 1 for a 2nd VCR, or 2 for a receiver, amplifier or tuner. Then press the STAR (*) button.
  4. Press POWER to put your remote into scan mode.
  5. Press the UP or DOWN ARROW repeatedly until your device turns off. Each arrow press tries the next code your remote knows for your selected device type. When your device turns off, you have found a compatible code. When the remote runs out of codes to try, the device will flash rapidly eight times.
  6. Press POUND (#). The mode button will flash three times as it stores the found code.
  7. Turn the device back on and try some of the other buttons to make sure they work. If all functions work, your remote has been successfully programmed.
  8. If the code didn't work, repeat this scanning procedure to find a more compatible code. When your device turns off during your next scan, press the arrow key again until the device turns back on to signify you have found the next compatible code.
Your device's remote control codes for your TV, VCR, or receiver are now programmed into your DISH Solo DVR ViP 612 remote control.

(The other way to program your DISH Solo DVR ViP 612 remote control is to look at the tables in back of the user manual, and enter the code directly.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

2 Answers

Codes for tv remote for dish


If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts. Dish TV remote control code list is given.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Sep 16, 2014 | DISH Network Televison & Video

1 Answer

Howto get c odes for hiensen tv for dish remote


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Sep 13, 2014 | Televison & Video

1 Answer

Codes for DISH remote codes for Cielo TV 24" tv/dvd combo


Hi Anita, my name is Kimberly and I form part of the Social Media Department with DISH. This first link provides the procedure on how to program the remote http://www.mydish.com/support/program-to-tv-code-non-basic?WT.svl=leftnav This second link will provide you the codes needed to program the remote to the TV (The top line would be your remote model # you will find this number on the back of your remote, make sure that is the one you enter)http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav if you need further assistance please let me know at: Kimberly.escobar@dish.com .

Once you have obtained the codes that can address to your television you follow this procedure to program the remote. (Which is the procedure provided on the first link):
Press and hold the clear TV button at the top left hand side of your remote for 5 seconds (all the other clear buttons will light up) once this happens enter the code followed by the # button on your remote, the clear TV button at the top will light up 3 times, this means the remote has been programmed. You can verify the remote has been programmed by trying to up the Volume, once you verify it works be sure to press the SAT button at the top left once (to set remote back to SAT mode and avoid other problems) Feel free to contact me if you need further assistance.

Kimberly.escobar@dish.com
Social Media Representative
DISH L.L.C

Jan 17, 2014 | Televison & Video

1 Answer

Need code for emerson LD195EMX to program dish remote


This first link provides the procedure on how to program the remote http://www.mydish.com/support/program-to-tv-code-non-basic?WT.svl=contentArea This second link will provide you the codes needed to program the remote to the TV (The top line would be your remote model # you will find this number on the back of your remote, make sure that is the one you enter) http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav If you need further assistance please let me know. Once you have obtained the codes that can address to your television you follow this procedure to program the remote. (Which is the procedure provided on the first link)
Press and hold the clear TV button at the top left hand side of your remote for 5 seconds (all the other clear buttons will light up) once this happens enter the code followed by the # button on your remote, the clear TV button at the top will light up 3 times, this means the remote has been programmed. You can verify the remote has been programmed by trying to up the Volume, once you verify it works be sure to press the SAT button at the top left once (to set remote back to SAT mode and avoid other problems) Feel free to contact me at: kimberly.escobar@dish.com if you need further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Aug 25, 2013 | Emerson EWC1303 13 in. TV/VCR Combo

1 Answer

Need code for vizio tv trying to program dish remote to vizio tv


Easy!
Still have dish service? their box? Go to box's menu "setup" option, choose "remote control". "On screen" logos will guide you through the procedure.
No box, no service? Knock on your neighbor's door and ask him to look at "menu". find your brand, write down code(s)! Last resort: call dish customer service and ask them to program your "clicker" they are all 'learning" and will be programed via "box'. Be creative! Or, worst case: get universal remote and set it up for both: dish and TV!
Luck is on your side!

Nov 08, 2011 | Televison & Video

2 Answers

Need remote code for LG 32lcd350 TV for dish 3.0 remote


Hi there my name is Kimberly Escobar with DISH Network Customer Support. I understand you need the codes to program a DISH Network remote model 3.0 to an LG T.V. Some of the codes we have are 678, 506, 520,123, 000, 512, and 213. To integrate the code into the remote you would need to press and hold the clear T.V button at the top until all the other top buttons light up in red, then once you see them light up you would need to enter one of your codes followed by the pound key (#) for example if you choose code 678 it would be 678#. After you press pound the T.V button will flash in red 3 times after that try the remote and make sure it functions with your T.V. I hope this is helpful to you. You can also view this link http://www.dishnetwork.com/SupportSection/power-scan-instructions which contains information on how to program your remote to your T.V using a different procedure. If you have any additional questions or concerns please feel free to contact us directly at 1800-333-DISH thank you.

Sep 05, 2010 | DISH Network IR Remote Control

1 Answer

Remote control programming in tv codes LG


Hi this is Kimberly Escobar with DISH Network; to program your remote control to your LG television you can most definitely try integrating a code to it. Some of the codes we have for the LG brand would be 678, 506, 520, 156, 766, and 627. To program the remote you would press and hold the T.V button at the top of the remote until all the other buttons light up in red once you see that all the other buttons light up you will enter one of the codes you have followed by the pound key (#), you will then see the T.V button light up 3 times. After this procedure you can try using your remote with your T.V and verify it works. There is also another way of programming the remote to your T.V in case the codes don't work that procedure is called Power Scan. On this procedure we actually search for the code instead of just integrating it to the remote. here is this link http://www.dishnetwork.com/SupportSection/power-scan-instructions here you will find the procedure and more information about your remote. Hope this helps if you have any questions or concerns please feel free to contact us directly at 1800-333-DISH.

Aug 03, 2010 | DISH Network IR Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...