Forgotten voicemail passsword

To reset the password on your Comdial 7260 00 voicemail, follow these steps:

1. Dial the voicemail extension from your phone.
2. When prompted, enter the default password. The default password is usually "0000" or "1234".
3. Follow the prompts to change your password. If you are not prompted to change your password, press "9" for the mailbox options menu, then "8" for the password menu.
4. Enter your new password when prompted. Make sure to choose a secure password that you can remember.
5. Confirm your new password when prompted.
6. Hang up the phone to save your changes.

If you are still having trouble resetting your password, you may need to contact your voicemail administrator or Comdial customer support for further assistance.

If your j7 is removable battery. Pull out the battery and back to unit. Then hold and press home button,volume up and power. Until android logo appear, in the recovery choose wipe data/factory reset. Then reboot your unit

• If you have lost or forgotten your master password or you want to disable the feature, you can reset the master password. Resetting the master password will remove all stored password information. Upon resetting, you will lose all the stored information in the Password Manager, as this is a built-in security feature to prevent people from simply resetting your Master Password to gain access to your passwords.

1. Choose Tools -> Error Console
2. Paste the expression
   openDialog("chrome://pippki/content/resetpassword.xul")
3. Press the Evaluate button.
4. Accept when prompted with the confirmation dialog box.

This is going to depend on what carrier you have, if youre going through a carrier that supports visual voicemail (where its downloaded automatically to your device, not where you have to call in) then you may need to setup your voicemail again. If youve forgotten your password you can call your carrier and hVe them reset it for you. They will either give you a temp password or just remove the password. You now have to reestablish a password and then put it in your phone. To call voicemail either press and hold the number "1" on your keypad under "phone" or simply dial your number and hit call. Once in your voicemail listen to the options, and choose administrative, or setup(these may vary by carrier) then "change your password". Once youve done that, hangup and then choose voicemail under "phone", it should prompt you for your password, just enter the one you just created and the rest should take care of itself. You can also call your carrier and get their assistance if that doesn't work, just call from a different phone so they will be on the line while you work it out. Good Luck!

reset your cmos

Reset voicemail password from AT&T's automated system

Call 611 or 800-331-0500.
Enter the wireless number starting with area code.
Press 3 to "get help with voicemail."
Press 3 to reset your VM password.
Enter the Billing Zip code for the account.
After a few seconds, iPhone will display "Password Incorrect - Enter Voicemail Password."
Enter the last seven digits of the wireless phone number and tap OK.


Reset voicemail password from AT&T's website
NOTE: You must be registered and logged into myWireless Account to view this information.

From the myWireless Account home page, select Phone/Device then choose the Reset Voice Mail PIN link from the left column.
IMPORTANT: If there is more than one line on the account, make sure the correct wireless number is displayed in the Wireless Number list before selecting Reset Voice Mail PIN.
To reset the password for any of the lines on the account, choose a wireless number from the dropdown menu
Click Submit.
After a few seconds, iPhone will display "Password Incorrect - Enter Voicemail Password."
Enter the last seven digits of the wireless phone number and tap OK.

The common username and password are the following:

Username :admin
Password :admin

Username :admin
Password :password

If these does not work try to reset the router to factory default and then the same would work

In order to reset either there would be a dedicated reset button either on front or back of the router,or there would be a reset hole where u need to put in a pin and hold it for 20-30 seconds, if none of them are available press the power button and keep it pressed for 40 - 50 seconds, it should work

yes call the network operator customer care

What password is no longer valid? The admin, the operator, the installer?

What are you pressing to log in?

i need master clear codes for these phones

lg chocolate
motorola v3 razor
samsung juke