Question about Computers & Internet

1 Answer

Onboard Display Problem - Computers & Internet

Posted by on

  • Douglessd
    Douglessd May 11, 2010

    Need a little more information. What is the problem? I'm guessing it is not working. :) Here are some trouble shooting tips. I know they sound obvious but you never know. Have you tried a different Monitor on your computer? Is the monitor you have getting power? Can you try your monitor on a different computer? Have your tried to boot in safe mode? What actually happens when you switch your computer on? Post what happens when you try these things and I'm sure you will get some more responses here :)


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 392 Answers

Change the motherboard on else try changing the display chip and the capacitor . If u can do it well u can proceed or else contact nearby expert..

Posted on Jul 21, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No screen display from z87k onboard graphics

Is this a new MB? Can you get video with an add in card? It is possible the display settings are out of specs for your onboard video. (Like 1900x1080 when your MB will not recognize anything larger than 1600x900)

Aug 18, 2013 | ASUS Computers & Internet

1 Answer

HP d530 sff with XP won't boot with NVS400 PCI card installed

display first going to your Nvidia card which is i think is faulty, however if you still want to attach it , change the bios setting, display first to onboard instead of pci

Jan 30, 2013 | Nvidia Computers & Internet

1 Answer

Can a PCI video card be installed on the Intel SE7501BR2 server board? My onboard video has color problems. I tried a known-working PCI video board after turning off onboard video, but got no video...

Most of the time you'll need to change a setting in the BIOS to force the computer to recognize the PCI slot first. Try going through your BIOS settings until you find it. It should be something like "Display First" or Primary, and it should be set to onboard graphics. Try changing that to PCI and see if that fixes your problem.

Aug 29, 2011 | Intel Server Board SE7501BR2 Motherboard

2 Answers

I have a Dell Latitude D630 and the display, even on the BIOS screen, looks like six small EGA displays displays on the screen. The display is duplicated once across and three times down the screen. ...

Try booting in safe mode with networking (press and hold F8) after pressing power button. Once in safe mode check display drivers are up to date, and try again.

Another way to check might be using any linux bootable CD. TO do this, download any liveCD image of any flavor of Linux, burn on a CD and boot off of it from this laptop. If the same thing happens, then its a hardware issue

Hope it helps!

Mar 07, 2011 | Dell Latitude D630 PC Notebook

2 Answers

How do i disable the onboard graphics card on the GM5084?

You can go to the devices menu and at the top of the menu screen are two computer icons one is to activate and the other is to shut down or disable it. You can also right click and disable it. Devices is located XP on the desktop right click and go to properties. Select device programs or you can find it on 7 in the control panel.

Jan 30, 2011 | Gateway GM5084 PC Desktop

1 Answer

My Onboard display just stopped working all of a sudden and all i did was unplug the monitor cable in and out. The pc works fine wen i put an other card in so the problem is definately the onboard display....

This is most likely a setting for your motherboard that has changed: go to your CMOS setup/configuration options and select the primary display adapter as your onboard/internal adapter.
In general, taking the external video adapter out will force the motherboard to revert to the internal adapter: try this first and during the boot sequence hit the function key that will get you into the motherboard Setup options.

Hope it helps.

Jan 22, 2011 | Intel Computers & Internet

1 Answer

How to disable onboard display adapter without accessing BIOS?

Disable the motherboard device in the Device manager

Mar 27, 2010 | ASUS M2NPV-VM Motherboard

1 Answer

I need gate performance 1400 display adaptor...any idea on how to get my display going?

good day sir, if you are talking about the onboard vga, you may need to go to CMOS setup and locate the settings in where you need to choose the Onboard vga. there are several options. PCI/AGP/PCIe/onboard, select the onboard one. hope this helps. if you have any more questions feel free to ask. thanks.

Jul 16, 2009 | Gateway (4000811) Motherboard

1 Answer

Display problem.

Plug your monitor into the onboard video and make sure your bios options have onboard video turned on and fire it up

Jun 22, 2009 | ASUS A7N266-VM Motherboard

1 Answer

No display from Gigabite 945 mother board but SMPS ok

Are you using the onboard display or an extension slot and card? Gigabite has the ability to turn off and on both the AGP or PCIeX16 slot and the onboard video in the bios. (Noting: some 945 variations have onboard video and some don't, some later versions of the 945 have PCIe X16 slots, some older versions have AGP X8 slots) Check to make sure your bios doesn't have these turned off for what ever you're using. 

Sep 12, 2008 | PC Chips Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides