How can I do a OS reload for Acer one 10 - Acer Computers & Internet

Standard troubleshooting should always be performed and logs should be submitted for review prior to reloading device software.
Only proceed with reloading the device software to the BlackBerry 10 smartphone or BlackBerry PlayBook tablet if instructed by BlackBerry Technical Support Services or as directed by another BlackBerry Knowledge Base (KB) article.
Warning: The following procedure will delete all data and applications on the BlackBerry device. If possible, back up the data prior to performing the procedure. For information on how to back up data from the BlackBerry 10 smartphone or BlackBerry PlayBook tablet, see KB33526.
Before proceeding, download and install (or update to) the latest version of BlackBerry Link found at www.blackberry.com/blackberrylink.
To reload the BlackBerry 10 OS or BlackBerry PlayBook OS, complete the following steps:
BlackBerry Link version 1.2.3.23 (Windows):

1. Open BlackBerry Link.
2. Ensure the computer is connected to the Internet.
3. Power off the BlackBerry 10 smartphone or BlackBerry PlayBook tablet.
4. Connect the device to the computer via the USB cable.
5. Under the Devices heading, click the device name when it is displayed.
6. Click Preferences at the top-right.
7. On the left, click Reload Device Software.
8. Click the Reload button.
9. Click OK to confirm.

BlackBerry Link version 1.2.1.10 (Mac OS):

1. Open BlackBerry Link.
2. Ensure the computer is connected to the Internet.
3. Power off the BlackBerry 10 smartphone or BlackBerry PlayBook tablet.
4. Connect the device to the computer.
5. Click the device name when it is displayed on the left.
6. Click the Reload button.
   Note: If the device is not detected by BlackBerry Link, at the top of the screen in the menu bar, click BlackBerry Link > Preferences > Reload to complete the reload.

The driver for that cd Rom is not loaded or is corrupt. You need to install a correct device driver. If it still doesn't work try reloading the os.

Try formating your harddrive and reloading the OS. If that doesn't work you might need a new harddrive.

to tell u the reality the recovery disks is of no use as per my openion.
as they cant reload the OS in case ur machine crashes....so just have a WinOS CD from which u can reload OS again in case there is any crash,
the recovery disks do work but they wont help you in case you need to reload the OS again.
So just buy a WinOS if ur machine came with preinstalled OS
this is my experience and personal openion, the rest of the decison is left to you.

Sound like yuou hard drtrive might have bit the dust. have you attempted to reload your system with the cd? If it doesn't reload replace the hard drive then reload the OS. Theire are 55 download available for you notebook including the ISO CD

http://www.acerpanam.com/synapse/forms/portal20.cfm?website=AcerPanAm.com/canada&siteid=7297&areaid=17&formid=3394#results




http://www.acerpanam.com/synapse/forms/portal20.cfm?recordid=1016&formid=3425&website=AcerPanAm.com/canada&siteid=7297&words=all&keywords=&areaid=17

Call up Acer and see if they offer some sort of OS deal were you can "buy" a copy of XP or vista on CD from them at a discounted price. Sounds like you need to try to do a fresh wipe and clean reload of your OS.

Otherwise, I would recommend taking to a local computer shop and see if there is any hardware damage or if it just needs to be reloaded.

Reboot your system-press and hold F8 until you get a list of options-select Safe Mode-enter.Your system will run in Safe Mode,giving you a dropdown list as it progresses-check where it stops.In this way you can establish wether you have a corrupted or incompatible driver and which {Graphic ie} stop the system.You will have to reload the OS to solve the problem.If you cannot even boot into Safe Mode,your drive very likely crashed.Happy landing.

if you haven't delete the recovery partition, you can reload the OS using alt+F10.
during boot (after acer logo), press alt+F10, it will guide you to reload your OS.
if your recovery partition is corrupt, you should call acer call center to get the cd or you can buy cd from microsoft

You will need to contact Acer for the restore discs. If for some reason you can not get the discs you will need to contact some one who has an OEM version of the windows disk you need. Even then it Microsoft may or may not activate that copy of windows. So hopefully acer can help you. Here is their number, 800-445-6495 however they do charge for support. If you are still with in your warranty then call the number on your warranty statement Any big box store, ie Best Buy can provide you with a print out of the manufactures warranty if it was sold by them. I hope this helps.

hi
if currently you r reloaded your os jenune verson then type product key when ask,other wise again reload os which is having cd key,other wise reload pirated verson os but it is risky for you .
by by.