Question about Office Equipment & Supplies

Open Question

I have a 2009 600 e-tech renagade and it will not start on start button so there for i have no reverse . i can start it by crossings syloniod but still it has no reverse. Anybody have a fix ?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Tech Solutions shredder Only powers in reverse w/ green light

These are made by Winsource Industries http://www.winsource-hk.com/ The contact information is Hong Kong. I haven't had any luck getting a replacement for one with a Limited Lifetime Warrany.
Good Luck -

Posted on Feb 12, 2009

Ad
JayBlair
  • 328 Answers

SOURCE: Tech Solutions shredder Only powers in reverse w/ green light

Their are sensors on top and bottom of cutter asm. Good chance one or more are dirty, blocked with paper shreds or just bad. Clean with compressed air and lightly moistened cotton swab.

Posted on Jun 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reverse works but forward will not engage.


Your problem is within the "switch" if you can only use it in reverse. Unfortunately, no parts are available for that "discontinued" model. Best answer is to buy a new shredder.

Jan 23, 2011 | Tech Solution TS-8000 Cross-Cut Shredder

1 Answer

How do i do a screen clabration on a brother pc-8200 sewing machine? Thanks for the help


try this
While pressing the start/stop, reverse stitch and needle position buttons, turn on the power to display the screen
for the touch panel adjustment mode.
2. While pressing the start/stop button, touch the touch panel at the positions marked by crosses (+) in order from 1 to
5.
(When touching the touch panel, use an object with a rounded tip such as a pencil or matchstick. Never use a
hard or sharp-pointed object.)
If the buzzer sounds once when cross number 5 is touched, the adjustment has been made correctly.
If the buzzer sounds twice when cross number 5 is touched, an error has occurred. In this case, touch the
crosses on the touch panel again in order from 1 to 5.
Never press the thread cutter button during this time. (Doing so may cause a malfunction.)
3. Turn the power off, then on again and check that the screen display and the touch panel positions are aligned

Jun 30, 2010 | Brother PS-1250 Pacesetter

1 Answer

Where is the fuel filter on this car? Car was running fine, this morning I started it up, missing alot, A/C made it worse. I drove it to church 4 miles and when I started it up to come home check engine...


hey mine is missing to it is not shifting into reverse right it slams everything i have found points to the pcs pressure control syloniod i also filled up and got 20 miles and used half a tank

Jun 06, 2010 | 1999 Saturn SL

1 Answer

Tech Solutions shredder Only powers in reverse w/ green light


Their are sensors on top and bottom of cutter asm. Good chance one or more are dirty, blocked with paper shreds or just bad. Clean with compressed air and lightly moistened cotton swab.

Jun 01, 2009 | Tech Solution TS-8000 Cross-Cut Shredder

1 Answer

Tech Solutions shredder Only powers in reverse w/ green light


These are made by Winsource Industries http://www.winsource-hk.com/ The contact information is Hong Kong. I haven't had any luck getting a replacement for one with a Limited Lifetime Warrany.
Good Luck -

Jan 25, 2009 | Tech Solution TS-8000 Cross-Cut Shredder

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...