I have canon2202 copy but the copy give me darek papper how can fox this

Clean the 2 registration sensors and the registration clutch. Mostly this is caused by paper dust to the 2 registration sensors. This sensors is easily removed by opening the side cover , you'll see the registration sensors at the lower part of the drum unit. There is only 1 screw holding this. Remove that screw and slide it to remove.

i am his friend from school. I know his password, I will give it to anyone onn one condition. Send me a fox hat. this is no SCAM its true. i am eve435

put machine oil on papper roller let run a few pappers intell it gets worked in then see if paper is sticking if this doesnt work blow it out with air in can there has to be papper jamming the papper side.

hello ,

first check your toner cartridge. some time your toner cartridge is damage then black print out is coming.
then check your machine printer and faxes ,check print pages status.sometime their have early print outs.

didnt solve your problem you have to replace main board

These machines use a fuser film. When they get torn or go bad they make a paper crumpling sound. When this happens it also causes wrinkles and creases in your copies. There may also be areas of your copy where the print will rub off. This means it is time for a new fusing unit. They are not cheap and removal of the old unit and installation of the new unit is not easy so plan on having a service person replace it. Just do a search for Canon D860 fuser or fusing unit.
Good Luck and Thank You for using Fixya.

I know some one who has built some really good fox hunt antenna's. However, things of this nature are usually kept secret. For instance, i have known him a while, and he trusts me, but he still will not give me any info on how he has made them.

It will be hard to find any one freely giving this info up.

Darek,

You can buy this part anywhere that sells GE parts. We are a parts supply company and are factory authorized for GE, as well as most other major brands.

We are happy to help you and look forward to working with you. Please contact us if we can be of any further assistance.

The best of luck to you!

There is a little white tab on the left hand side of the papper tray. If it dose not pop up the papper when the tray is closed, you will get a papper error,.

I seem to have fixed the problem on my Samsung SCX-4521F. The paper was feeding about 1 third through and stopping. I figured it was the large soft black paper roller which can be viewed at the back of the paper tray, loosing its grip.
So I initiated a copy function and turned the machine off half way through the soft black paper roller doing its 1 revolution.
This allowed me to access the back of the roller where I slipped a SLENDER toothpick under the rubber making sure the ends were trimmed.
This gives the rubber some extra grip and it is working for me... so far.

This problem is occure due to Logic Card Problem or Paper feed motor Problem. Bhavin - India