Question about Televison & Video

1 Answer

I have 2 logik tvs L32DIGB20 and L40DIGB20 both with the same fault red light on press on goes to blue but screen remains blank any ideas please?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Televison & ... Master
  • 6,694 Answers

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electro-medical.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Posted on Dec 29, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the code for my Logik tv model no L32DIGB20 SO I CAN PUT IT IN TO MY SKY REMOTE


Try this clip I have just found, hope it helps.
TRY 0335 OR 0060
PRESS TV ON YOUR SKY TV REMOTE , PRESS RED & SELECT TOGETHER UNTIL RED LIGHT FLASHES TWICE , PRESS TV ENTER 0335 OR 0060 PRESS TV AGAIN THEN THE OFF BUTTON IF THIS TURNS OFF YOUR TV SELECT IF NOT PRESS TV THEN THE OFF BUTTON AGAIN REPEAT THE LAST BIT TILL THE TV TURNS OFF THEN PRESS SELECT ; DONT RUSH THIS BUT FOLLOW THIS TO THE WORD HOPE THIS WORKS FOR YOU .
I FOUND THIS ANSWER ON THE WEB IT'S BY AN EX SKY ENGINEER . GLAD TO HELP...

Dec 19, 2015 | Televison & Video

1 Answer

Logik L32DIGB20 TV comes on with retrieving data sign & control won't work anything whilst this on screen. Says refer to manual re firmware - not in mine - help please


A firmware update is necessary. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Jan 27, 2015 | Televison & Video

1 Answer

Logik l40digb20


Hi, my LOGIK L40digb20 red light wont turn on and just shows a red light, any ideas what it could be? I have checked all the capacitors but no luck. Many thanks, Mark

Aug 21, 2014 | Televison & Video

1 Answer

Logik tv


Fault with main board. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Aug 13, 2014 | Televison & Video

1 Answer

My tv logik comes on from blue to red green keeps repeating


A bad symptom indeed. Contact the authorized service center. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Timeslide" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
Screen-shots to defective LCD are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

Jul 20, 2014 | LG 32LD550 32 in. LCD HDTV

2 Answers

Need base stand for logik l32digb20


I need one too for same model. if you find let me know

Mar 25, 2013 | LG 32LD550 32 in. LCD HDTV

1 Answer

Blank screen with blue light


Hello
Check the backlight inverter board to your TV. This is a common fault for most of the LCD TVs. If it is faulty, the backlight won't light up, resulting a balck screen with sound.
This is the picture of the backlight inverter board to your TV. OK.12_23_2011_4_29_45_am.jpg

Dec 23, 2011 | Sceptre X400BV-FHD 40 in. LCD TV

3 Answers

Harwa tv childlock code


For Harwa (also branded Logik) 54cm colour TV with remote RC-A07 showing blue screen with red lock in the corner, hold down "music" button on remote for 10 seconds to unlock.

Oct 24, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Logik tv lcx27wn2 sound but no picture


the only info I could find on this is one withthe same problem. Replacingthe monitor had no effect and the store exchange it.

Jun 18, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5105 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...