Question about Home Security
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Sentury Fire Proof Safe 1250
Is there any way to crack the safe by feel, ive seen it done before and have some experience in opening locks with pin tumblers, but not wheel tumblers. i can find the notch in the third wheel at around 10-15 but i dont know where to go from there. I would not be using this information for any illegal use, i just need to open my safe on my own, and soon, thank you.
Posted on Sep 21, 2008
SOURCE: cant open my safe
Hi, Afraid to ask, but is it that you need to know how to put batteries in? If so Turn the electronic lock clockwise ( to the right) from the 12 o'clock position to the 2 o'clock position which opens it so you can put in 4 fresh AA batteries replace the assembly by turning it to the left from the 2 o'clock back to the 12 o'clock. enter your combination and check for the green light. Good Luck!
Posted on Feb 01, 2009
I found this hope it will help. So I called the
sentry safe company, (800-828-1438), and waited for about 10 minutes to speak
to a representive, (that was alright since I have a speaker phone). The first
thing they asked me was about the condition of the batteries. I told them that
they were brand new. The person then asked about the brand name and expiration
date of the batteries. They were generic batteries, but the expiration date was
fine. They suggested a new set of batteries, and mentioned that I could bypass
the battery pack, (which sometimes fails), by unplugging the pack and using a
regular 9 volt battery.. So just to cover the base, I went down to the store
and obtained a brand new 9 volt duracell battery. I unplugged the battery pack
and plugged in my new battery. I then pushed the combination numbers and my
safe again failed to open.
I called the sentry company back using my speakerphone feature again while waiting to speak with a technician. The tech asked me about the batteries and I told him it had a new 9 volt at the last technician’s recommendation. The person began to talk about the actuator cylinder inside the safe, stating that it did not sound like it was actuating. Then they told me something that really made me wonder about the quality of this safe. They told me I would need to hit the safe with a rubber mallet in an attempt to get the actuator to engage so I could open the sentry safe. OK, so the safe is supposively built to keep my belongings safe from thieves and fire, but now I am going to fix it with a rubber mallet? Good thing my sentry safe was inside, somebody might have wondered about my mental state if they had seen me beating this fireproof safe with a rubber mallet! (PS: If you use the rubber mallet option or any other suggestions that sentry’s customer assistance supplied, and have firearms or dynamite in your safe, you do so at your own risk, use wise judgement for your own safety)
Well it just so happens that I had a rubber mallet and did not need to once again go to the store to get something to personally fix my great sentry fireproof safe. So I begin beating the sentry safe with this mallet and then tried the combination again. Woolah, It opened! I stopped for a moment and began to ponder how many other things I could fix with this magical rubber mallet. I mean, what about the TV, the computer, my fridgerator and that cell phone that always drops calls? Could it be that I have discovered the fix all to all mechanical issues? As I began to look at my belongings in my fireproof safe that I have just opened with a rubber mallet, I thought "so if I close the safes door will I need a sledge hammer next time"?
Time for another phone call, back to the speakerphone. The technician this time listened to my issue and asked me if I had some lubricant like WD-40 with a small tube that attaches to nozzle. I thought, "well of course I do, I was just using that to fix the broken water pipe in the garage." The phone tech tells me where to spray the lubricant on the inside of the sentry safe door. He has me do this in the open and closed combination positions, and it’s now opening when I press the combination numbers with the door open, hurray! The only problem is that after working in the lubricant a few times the handle on the door does not lock into the locked position. I no longer need the combination to unlock my safe, I only need a can of lubricant! OK, this is one really tough safe, what thief would ever think that they would need a rubber mallet and a can of silicon lubricant to open up a safe?
Back to the speakerphone, this time a lady technician. She wants me to get a screwdriver and pry off the plastic piece on the back side of the door. At this point I said to her, you have built a product that I need to have a rubber mallet, a can of 3 in 1 spray lubricant, and a screwdriver to open? She stated that she was doing all she could to help me fix my safe and asked me how long I had owned the safe. I told her about 2 years and she stated that it was out of warranty. I thought, well who needs a warranty when they have a magical mallet, a can of black led, and a screwdriver? Anyway she directs me to pry the plastic backing off of the door and when I do this little piece of plastic falls out onto the floor. I look at this little plastic piece pondering in my mind, what’s it’s part in all of this. Well the technician is directing me to look at the arms and gears and some arrows that line up between the metal arms and plastic gears. What’s wrong with that picture? Metal and plastic don’t really work together long before the plastic breaks. I had to wonder for a moment, is this some really expensive fireproof plastic? The arrows line up and with that information she directs me to the area of the actuator again, she says "you see the circuit board" and a little white button that sticks out from it?" I said well yes, I see the circuit board and the little white button you are talking about seems to be laying on the floor broken off. So I picked it up and said, "this little broken piece of plastic that connects to the metal arm on the safe is why the safe does not work right?" She tells me yes that’s the problem, that i have broken it and since it’s out of warranty that there is nothing she can do to help me. But she then asks me to hold on for a moment…..
She comes back to the phone sounding sincere, like she has just solved all my problems, and tells me that she has spoke to her supervisor and that they can offer me 10% off on any safe that I would like to purchase. I thought what great customer service, now they want to sell me another safe with metal and plastic pieces that break and give me a huge discount of 10%, and I bet it comes with a free maintenance kit which includes a polo stick, some lard oil, and a screwdriver on the rocks! Needless to say I declined their gracious offer.
I will say that all the organizations personnel, (that I spoke with), were courteous and trying to be helpful, (that was within the realm of authority they were given). With a product such as this, and the great customer service I experienced, I thought it was probably best to find a safe that was free of little plastic pieces that break off, cause those plastic pieces won’t save you 10% !
Posted on Oct 08, 2009
Tips for a great answer:
Jan 08, 2016 | Paragon Lock & Safe SureDrop 7875 Digital...
Enter your code on the keypad located on the front of the safe. Some electronic digital safes require you to input a special character like "#" before and after your code. The safe should either beep, have a LED turn green, or display "OPEN" if you have correctly entered the code.
Turn the handle to the right within five seconds of correctly entering the code. If you wait too long, the safe will lock and you will have to enter your code ag
Open the safe with a key. Use your emergency key that came with the safe to open it if you forgot the code or if the batteries have died. Remove the key cover from either the handle or the control panel to reveal the lock.
Enter your code to open the safe.
Place the electronic digital safe into code reset mode. On some models you need to hold the last digit of the code or press the "*" button to get into code reset mode. Other safes require you to open them and press a small red button on the inside of the door.
Enter your new code on the keypad and press "#" to finish. Some safes may require you to press "*" or a letter to finish the code. If the safe requires it, enter the new code again to confirm that you entered it correctly.
Use your code to open the electronic digital safe's door.
Locate and remove the battery cover on the inside of the door.
Replace the used batteries with new ones. For most safes, this will require two or four AA batteries.
Test the batteries. Use your code while the door is open to test the batteries before closing the safe.
Feb 08, 2015 | Locks & Locksmithing
Aug 29, 2014 | Paragon Electronic Digital Safe Jewelry...
Aug 29, 2014 | Paragon Electronic Digital Safe Jewelry...
Feb 08, 2013 | Sentry Fireproof Safe
Aug 12, 2010 | Sentry Fireproof Safe
Aug 07, 2010 | Sentry Fireproof Safe
Apr 07, 2009 | Safe International Digital Electronic Safe...
Jan 26, 2009 | Sentry Fireproof Safe
53 people viewed this question
Usually answered in minutes!