Question about Dacor Ovens

Open Question

Wall oven dacor fixing light bulb and F1 warning light on.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: dacor cps130 wall oven f1 error

According to the manual, this is an element relay circuit failure. Call the tech.

Posted on Jun 15, 2008

Ad
reg501
  • 413 Answers

SOURCE: F1 error Dacor Oven

I'm sorry but I am not familiar with Dacor ovens, the research I performed indicated that the ERC (clock module) has failed. You could try the oven sensor probe if it is a temperature related issue.
I truly wish I could help you further with your dilemma but am unable to provide any further information except search the web. Good luck....

Regards;
reg501

Posted on Jul 02, 2008

abhishek33
  • 1239 Answers

SOURCE: dacor cps130 wall oven f1 error

hi The range timer is usually located in the control panel on top of the range. If you suspect the timer is faulty, don't try to fix it yourself. Remove it and take it to a professional service person for testing. Here's how to remove the timer:

Step 1: Remove the back service panel to the control panel and release the spring clips that hold it in position, or remove the retaining screws.

Step 2: Push the timer forward to release it.

Step 3: Remove the electrical lead wires from the timer housing. If, when disassembling the timer, you notice that the electrical wire terminals look burned, remove these leads and buff the leads and the terminal points with fine steel wool. Burned and/or dirty terminals can cause the timer to malfunction, but a good cleaning can solve this problem.

Step 4: Replace the old timer or install a new one of the same size and type, if this is necessary. Connect the new timer the same way the old one was connected.

Posted on Nov 06, 2008

localwonder
  • 6784 Answers

SOURCE: Dacor error codes

HI. the F-1 code is a System Watchdog Circuit failure code.

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).

Concerning the F-5 code. This is an oven temp sensor failure code. have it replaced asap. ((Check the wiring leading to and from the control and sensor for cracks and fouled structure. if the wiring is bad, replace the harness as well)),

Posted on Aug 01, 2009

  • 523 Answers

SOURCE: ECS227 Epicure Electric Double Oven: I have a Dacor model # CPD227R double convection o...

replace touch pad

Posted on May 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a dacor double oven that is not running and keeps giving us error message of F1.. Neither of the ovens will work.. Any idea what is wrong and how to fix it?


Hello & Welcome to FixYa

Error code F1 is displayed due to electronic oven control failure and the only way to solve this problem is by replacing the control board which is bad. Please get back to me if you have any other questions.


Kevin

Feb 03, 2011 | Dacor Ovens

2 Answers

F1 error


Failed control board(micro-processor) replace board.
Known Dacor oven problem-

Nov 21, 2009 | Dacor MCS130 Millennia Electric Single...

3 Answers

My DACOR + ECS 130 covection oven light relay keeps clicking.....


I have the same problem and sent an e-mail to DACOR. A James Carlos responded and advised that DACOR could not provide DYI info because of liability problems, pure BS in my opinion. I've had problems with a DACOR microwave (manuf. by Sharp), my DACOR wall oven Model ECS103 and my DACOR Raised Vent system and told Mr. Carlos so. I don't know how to fix the blinking oven light other than cutting power at the circuit breaker panel or removing the two light bulbs which other have advised but suspect a new front control panel is required. If you find a fix, please advise me at bsquared37@yahoo.com. I think DACOR products are overpriced and junk.

Thanks, Bill 12/10/2009

Aug 27, 2009 | Dacor ECS130 Epicure Electric Single Oven

1 Answer

Dacor cps130 wall oven f1 error


hi The range timer is usually located in the control panel on top of the range. If you suspect the timer is faulty, don't try to fix it yourself. Remove it and take it to a professional service person for testing. Here's how to remove the timer:

Step 1: Remove the back service panel to the control panel and release the spring clips that hold it in position, or remove the retaining screws.

Step 2: Push the timer forward to release it.

Step 3: Remove the electrical lead wires from the timer housing. If, when disassembling the timer, you notice that the electrical wire terminals look burned, remove these leads and buff the leads and the terminal points with fine steel wool. Burned and/or dirty terminals can cause the timer to malfunction, but a good cleaning can solve this problem.

Step 4: Replace the old timer or install a new one of the same size and type, if this is necessary. Connect the new timer the same way the old one was connected.

Nov 06, 2008 | Dacor MCS130 Millennia Electric Single...

1 Answer

PCS 130 Keypad


Dacor probably won't cover anything. F1 is either the touch pad or ERC (clock). If it stops beeping when the touch pad is uplugged from the ERC then the touch pad is the problem if not it is the ERC. Call Dacor Customer service to get a price on the parts and to voice your displeasure.

May 22, 2008 | Dacor PCS130 Preference Electric Single...

2 Answers

Dacor error codes


HI. the F-1 code is a System Watchdog Circuit failure code.

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).

Concerning the F-5 code. This is an oven temp sensor failure code. have it replaced asap. ((Check the wiring leading to and from the control and sensor for cracks and fouled structure. if the wiring is bad, replace the harness as well)),

Apr 25, 2008 | Dacor ECS127 Epicure Electric Single Oven

1 Answer

Dacor cps130 wall oven f1 error


According to the manual, this is an element relay circuit failure. Call the tech.

Dec 04, 2007 | Ovens

1 Answer

Dacor convection oven cps127/130 failure code f1


i found my circuit/schematic tucked inside the back panel in a envelope, you have to remove the oven from the wall to gat to it and start un screwing the panels, i think it was on the top.

Sep 04, 2007 | Ovens

Not finding what you are looking for?
Ovens Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Vitaliy Gins
Vitaliy Gins

Level 2 Expert

78 Answers

ashburton

Level 3 Expert

417 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...