Question about Heating & Cooling

Open Question

Need part ODS assembly for Dyna Glow propane RMC-40.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wilsodfarm
  • 986 Answers

SOURCE: flames out the top of my propane top heater.

either it is rusted out or you need to blow out and clean your orffice

Posted on Nov 30, 2009

Ad
rowdy45176
  • 2176 Answers

SOURCE: what wick do i need for dyna glow rmc 95 c6?

you need wick part #3C, you can get it at portableheaterparts.com or call them at 1-800-362-6951.

Posted on Dec 08, 2009

TheMobilian
  • 8220 Answers

SOURCE: Dyna-Glo model RMC-8000PGH will not stay lit

Your pilot safety is full of dust. Flush it out with shop air or rust buster. Retry

BONUS INFO

Posted on Dec 17, 2009

  • 58 Answers

SOURCE: I have a dyna pro propane heater model

YOU SOUND LIKE YOUR ON THE RIGHT TRACK,, I USE GENERIC ONES THAT FIT IN WATER HEATERS OR FURNACES THE SALE THEM AT THE HARD WARE STORE FOR AROUND $10.00 USE YOUR IMAGINATION TO MAKE IT FIT, PRETTY EASY, GOOD LUCK LEAVE FEED BACK THANKS

Posted on Jan 17, 2010

  • 1 Answer

SOURCE: need a control knob for: dyna-glo pro propane

I AM TRYING TO FIND A PROPANE REGULATOR FOR A DYNA-GLO PRO. THE MODEL # IS RMC-TT30DGP. THERE IS A NUMBER ON THE OLD REGULATOR. THAT # IS S2NTT0002-2.THANK YOU.

Posted on Dec 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dyna glo RMC 40 NGT vent less wall heater that I would like to convert to propane, I need to know which conversion kit to buy, and where. Thank you.


dyna glo natural gas heater Questions & Answers - Fixya

www.fixya.com > Forum > Tags
dyna glo ventless rmc50 ngt can this heater be changed from natural gas to propaneuse, ... Dyna Glo Natural Gas conversion to LP Gas I have a Dyna-Glo natural gas space ... Question about D-E36 Infra-Red Wall Mounted Panel Heater ... dyna glo heater model #RMC-40GT I believe on your particular model , that you ...

Parts for Dyna Glo, Thermoheat and Dyna Glo Pro Heaters

spaceheaterparts.com/category.sc?categoryId=13
Shop Dyna Glo, Thermoheat, Dura Heat, Workhorse LP and oil fired htrs ... Circuit Board 2201181 Dyna Glo & Thermoheat 150k Nat Gas Htr RMC-FA150NGDGD ... This spark plug (ignitor) is used on Dyna Glo and Thermoheat 40K btu LP.

Propane Wall Heaters - Walmart.com

www.walmart.com > ... > Heaters

WalmartDyna-Glo IR18NMDG-1 18,000 BTU Natural Gas - Infrared Vent Free Wall Heater. $170. ... Dyna-Glo 40K Liquid Propane 360-Degree Tank Top Heater. $88.00 ... Dyna-Glo Deluxe RMC-FA125DGD Portable Gas Powered Forced Air Heater.

1352062 Dyna Glo Natural Gas conversion to LP Gas

162.220.53.34/F/.../t1352062-dyna_glo_natural_gas_conversion_lp_gas

Jan 12, 2016 | Heating & Cooling

1 Answer

My dyna glo heater runs for about 15 minutes then shuts off,I wait for a few minutes start it and the same thing happens.


The Oxygen Deletion Sensor (ODS) is clogged with dust, lint and/or pet hair. It's a safety feature that;'s reading the oxygen level as unsafe for operation. This happens because it's clogged.

You will need to turn the gas off and dismantle the heater's cabinet to access the Pilot Assembly.
Once you've down that, locate the pilot assembly and use a can of compressed air with a straw nozzle (like you clean your computer with) to blow out the pilot tip, Then look down the pilot itself, about 2/3rds of the way down from the tip (where the flame comes out) you will see a small hole in the side of the pilot. That's the ODS Sensor. Place the straw nozzle just barely into the hole and give a quick blast of air. That should clean any debris out off the ODS Sensor.

If you notice a lot of dust and lint o the inside of the heater, clean that out with a vacuum cleaner that has a hose and brush or crevice attachment. After cleaning thoroughly, reassemble the heater, turn on the gas and give it a try.

If that didn't solve the problem, you may need to replace the Thermocouple. Depending on the age of the heater; how much it has been used and not cleaned and service at least annually, it may be wearing out.

Hope this helped solve your problem. Please let me know.

Feb 15, 2011 | Dyna-Glo RMC-8001SS Heater

1 Answer

Need to see pictorial instruction on how to replace wick in a Dyna Glo RMC-95-C2 kerosene heater


I think the Dyna-glow RMC95 series of heaters are equivalent to DH2300 series heaters.
In any event, the wick you purchased should have ahd the installation instructions included with the wick.

If it didn't or you tossed it, Here's a link to the DH-2300 series heater's Owners Manual, which may help you.

http://www.yourheater.com/DH2301-3%20owners%20manual.pdf

Good luck. Be sure to wear rubber gloves when you try to install the wick. Particularly, if you still have kerosene in the tank.

Feb 11, 2011 | Dyna-Glo RMC-8001SS Heater

1 Answer

Need a control knob for: dyna-glo pro propane heater. model: # rmc-tt30dgp-01, # rmc-tt30dg, # rmc-tt30gd. this is the off/low/med/hi temp. control knob.


I AM TRYING TO FIND A PROPANE REGULATOR FOR A DYNA-GLO PRO. THE MODEL # IS RMC-TT30DGP. THERE IS A NUMBER ON THE OLD REGULATOR. THAT # IS S2NTT0002-2.THANK YOU.

Dec 17, 2010 | Heating & Cooling

1 Answer

Need a control knob for : dyna-glo pro propane heater. model # rmc-tt 30dgp-01, # rmc-tt30dg, #rmc-tt30gd. serial: # 09 005720


Contact GHP Group Inc, (877) 447-4768 to order a replacement regulator - MAKE SURE YOU HAVE THE PROPER HEATER MODEL NUMBER. Replacement Part Number: S2TT0001B for the RMC-TT30DGP.

Replacement cost including shipping is a couple bits over $21.

When talking to the technician on the phone, he cautioned me against rapidly opening the tank valve, which hammers the regulator (the replacement one is more robust than the original), kinda' like how water-hammer can cause damage to water pipes and/or water appliances. Open the tank valve gently, don't just whip it open (like I used to), your regulator will last a lot longer that way.

Because of the press-fit and pins used in the regulator construction & assembly, self-repair is not possible or recommended since the regulator may not seal correctly afterwards.

Dec 17, 2010 | Garden

1 Answer

Need Dyn-Glo Model RMI-70 ODS (Oxygen Depletion Sensor


Most of the time all you need do is blow out the sensor.
They don't wear out.

Dec 22, 2009 | Dyna-Glo RMC-8001SS Heater

1 Answer

Flames out the top of my propane top heater.


either it is rusted out or you need to blow out and clean your orffice

Nov 30, 2009 | Cars & Trucks

1 Answer

I have a small dyna glo that takes a propane cyclinder. i bought the hose to hook up to a 20 pound propane tank. every time the tank gets below a half tank the pilot light blows out and heater cuts off i...


There may be dust building up in the ODS safety pilot assembly. The simplest way toresolve this is to flish the pilot with rust buster. Why rustbuster? It has a telescoping tube that makes it easy to direct the squirt into the pilot. Let it dry then retry. You will be amazed.

Nov 10, 2009 | Dyna-Glo D-E36 Infra-Red Wall Mounted...

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

2597 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...