Question about Sharp Televison & Video

1 Answer

My Sharp aqueous tv is frozen on the Sharp logo screen and the controls wont respond to either the remote or on the television

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sharp Master
  • 6,694 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Posted on Dec 26, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp aqous LcD TV not powering on when you turn on only Sharp red color logo appears on screen screen stays frozen on the same screen nothing happens after that


Corrupted firmware. an update might be necessary. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Firmware (Software) update procedure of many popular brand TVs and other devices are given in detail.

Dec 15, 2016 | Sharp Televison & Video

1 Answer

I have a sharp aqueous 60" tv. It stopped responding to remote and manual buttons. I can unplug and plug back in, and it will work for a few minutes, then will stop responding again.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/

Dec 28, 2015 | Sharp AQUOS 60" 1080P 120Hz LED Smart HDTV...

1 Answer

My Sharp tv remote will not turn on / off tv. It will turn on by the main power switch on tv but not by remote.


From page 8 of the manual:

The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS television.

If the POWER indicator on the AQUOS television still does not light up, press TV POWER on the remote control to turn the power on.

IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP

http://www.nemsworld.com/theater/LC46_52D62U_Manual.pdf

Dec 04, 2015 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Digital tv channel stuck on Setup blue screen


Just contininue to try that it if not then you'll have to do a hard reset.

Feb 01, 2014 | Philips Televison & Video

1 Answer

My sharp aquos lc-42d65u is not responding to my remote control . another word my t.v does not read my remote control at all. can someone help me to fix my remote ?


U already change the remote control for brand new batteries wright?Yes.Remote controls devices are heavily depend on it CPU chip for all of it functions.Test the tv manual buttons like Power,Menu,Volume - + and Channel + - all work?Yes.The tv remote control CPU is dead that why doesn't read the tv infered laser signal at all.Try website like Remotes.com to buy an original remote for the replacement.

Apr 04, 2011 | Sharp LC42D65U 42 in. LCD HDTV

1 Answer

Screen is frozen on with no picture and no sound. Does not respond to either remote control or manual controls. The tv did work and then after a few minutes went frozen.


You need to move further south if it is frozen. It's cold up north :-)

If you've pulled the power from this tv (power cycled it) and it still has this problem ... frozen with no picture and no sound. How a screen can be frozen with no picture, I'm not sure. But it sounds like you are going to be on your way to the repair shop. Or to buy a new tv.

If I couldn't see and couldn't hear, how would I know you were even here?

Nov 22, 2009 | Philips 32PFL5403D/27 32 in. LCD TV

1 Answer

The screen has went snowy and wont respond to the remote


Snowy screen, unresponsive to remote control... Sounds like an interference from something. An example... A hairdryer can mess up a CRT really bad. Anything that is likely to create small EMPs will surely mess up your TV and even interfere with the infra-red. Not marking this as a solution, check everything and test the TV. Here's the test: Turn everything off, except for the TV. If it's still doing it then the remote infra-red is just a coincidental failure with the snowy screen. Sorry I can't help you further.

Oct 16, 2009 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

My Sharp Aquos TV has stopped responding to remote control(s)


Unplugging my TV for 15 seconds (longer actually - at least a minute) made the remote and the satellite TV remote both work again with the TV.  Thanks for the tip!

May 14, 2008 | Televison & Video

1 Answer

Citizen house tv that has a 'lock' logo on screen


The TV has been 'Locked'. To unlock it press the DISP button for 4 seconds. Since you have a universal remote and there is no way to determine which button is the DISP button try holding each button on the universal remote for 4 seconds until, hopefully, you find the correct one.

Mar 10, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...