Question about Lands Phones

Open Question

Have new Fossil Q Wander. System Update does not download and have constant message "Update Failed" recorded. What can done to correct problem?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Ps3 System Update Failed, PS3 boots with error code 8002F14E.

-Open the side of your PS3 where your HDD is. Take the screw out, but leave the HDD in.
-When the update begins, pull your HDD out of the slot. It will tell you an error occured and it tells you to restart your system and try again. Instead, let the count from 60 run out, your screen will go blank for about 30 seconds then it will start back up and tell you that your Hard Drive needs to be reformatted. If you do not get this msg after 30 seconds, do it again until it does! Now, slide your HDD into place again - (make sure your controller is PLUGGED IN) and press the white PS3 button on the controller. It will then ask you to either press start and select at same time OR white PS3 Button - PRESS START and SELECT. Do not agree to user agreements!! Simply hit cancel and it will kick back to the PS3 start up screen.

Posted on May 09, 2009

jennifer720
  • 830 Answers

SOURCE: manual update fails, no internet connection

I have had similar problems after trying to activate and update on my customers computers. I know it is Trend Micros servers that are down for maintenance. Wait a day or two and then try again and it will work. Your computer is protected during this time even though it is not activated/updated.

Posted on May 09, 2009

SOURCE: after firmware update it is showing new message signal...

check all the folders for any inread meaaseg. may be its a service message.you wer not notified abt it.

Posted on Jul 04, 2009

  • 1 Answer

SOURCE: Failed software download error messages 02 and 10

My version is actually DTR 67500T but I did not realise that you had recorded a different model !! until too late.The shop replaced it with another box

Posted on Nov 12, 2009

treborswindl
  • 212 Answers

SOURCE: PS3 Update successful,install failed,systemrebooted,error8002F14E

On the playstation 3 site error code tool says this code is an issue updating the PS3 sytem software. Try to start with the hard drive uninstalled then try again installed. If that dont help i would format the hard drive in a laptop and see if it helps. worst casr scenario you could dissasemble the PS3 and unplug tha battery on the main board and see if that helps. Good Luck

Posted on Nov 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

New Message light flashing even though there is no new message


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Apr 03, 2014 | Lands Phones

1 Answer

Software installation


you have xp and vista? on one machine?

Mar 23, 2008 | Panasonic RR-US395 Digital Voice Recorder

1 Answer

Entrar no Facebook webcams


Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right tick in either windows software or the all software box. If you don't have or cant find the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html It might take some time being a freeware driver solution Note: This will find all of your outdated drivers This program will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer b> b> Go to Facebook and log into your account. Click the "Profile" tab. Click the "Video" link in the "Status" menu. Select the "Record a Video" option. For privacy reasons, Facebook requests permission to access your webcam and microphone. Check the box next to "Allow" and click "Close." You will appear in real time on the Facebook webcam window. Position yourself in front of the webcam and click the red "Record" button to begin recording your new video. When you're finished, press the "Stop" button. Click the "Play" button to view your video. If you want to post it on your profile, add a brief message and click "Share." If you're not satisfied with the outcome, press "Reset" and record a new video. b> Video Message Log into your Facebook account Navigate through your friends list and select the friend you want to send a video message to on Facebook. Click the "Send Message" link in the upper-right corner of your friend's page. Click the "Video" icon in the attachments section at the bottom of the "New Message" window. Check the box next to "Allow" to give Facebook permission to access your webcam and microphone, and then click "Close." Press "Record" and record your new video message. Click "Stop" when you're finished recording. When you're finished recording, you can press "Play" to preview your video.

Feb 21, 2013 | Computers & Internet

1 Answer

I cant use the webcam in facebook


Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right tick in either windows software or the all software box. If you don't have or cant find the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html It might take some time being a freeware driver solution Note: This will find all of your outdated drivers This program will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer b> b> Go to Facebook and log into your account. Click the "Profile" tab. Click the "Video" link in the "Status" menu. Select the "Record a Video" option. For privacy reasons, Facebook requests permission to access your webcam and microphone. Check the box next to "Allow" and click "Close." You will appear in real time on the Facebook webcam window. Position yourself in front of the webcam and click the red "Record" button to begin recording your new video. When you're finished, press the "Stop" button. Click the "Play" button to view your video. If you want to post it on your profile, add a brief message and click "Share." If you're not satisfied with the outcome, press "Reset" and record a new video. b> Video Message Log into your Facebook account Navigate through your friends list and select the friend you want to send a video message to on Facebook. Click the "Send Message" link in the upper-right corner of your friend's page. Click the "Video" icon in the attachments section at the bottom of the "New Message" window. Check the box next to "Allow" to give Facebook permission to access your webcam and microphone, and then click "Close." Press "Record" and record your new video message. Click "Stop" when you're finished recording. When you're finished recording, you can press "Play" to preview your video.

Feb 03, 2013 | Intel Computers & Internet

1 Answer

I cant find my webcam in facebook


Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right tick in either windows software or the all software box. If you don't have or cant find the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html It might take some time being a freeware driver solution Note: This will find all of your outdated drivers This program will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer b> b> Go to Facebook and log into your account. Click the "Profile" tab. Click the "Video" link in the "Status" menu. Select the "Record a Video" option. For privacy reasons, Facebook requests permission to access your webcam and microphone. Check the box next to "Allow" and click "Close." You will appear in real time on the Facebook webcam window. Position yourself in front of the webcam and click the red "Record" button to begin recording your new video. When you're finished, press the "Stop" button. Click the "Play" button to view your video. If you want to post it on your profile, add a brief message and click "Share." If you're not satisfied with the outcome, press "Reset" and record a new video. b> Video Message Log into your Facebook account Navigate through your friends list and select the friend you want to send a video message to on Facebook. Click the "Send Message" link in the upper-right corner of your friend's page. Click the "Video" icon in the attachments section at the bottom of the "New Message" window. Check the box next to "Allow" to give Facebook permission to access your webcam and microphone, and then click "Close." Press "Record" and record your new video message. Click "Stop" when you're finished recording. When you're finished recording, you can press "Play" to preview your video.

Feb 03, 2013 | Computers & Internet

1 Answer

How do i download my youcam on facebook


Click start control panel view devices and printers you should see your webcam from there if you are have trouble with your webcam Click start control panel administrative tools computer management device manager scroll down image devices you could see a yellow question mark? right click to reinstall drivers or update driver xp Click start right click on computer select properties device manager scroll to image devices expand right click to update driver in W7 http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: webcam name webcam driver you might have to try a few times to get it right tick in either windows software or the all software box. If you don't have or cant find the driver you will need to download one here rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html It might take some time being a freeware driver solution Note: This will find all of your outdated drivers This program will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. Some webcams and programs require additional software, although that should be installed with the webcam if things are right. But is does not harm to check if your Java, Flash and Quicktime software are installed and up to date. But certainly check your DirectX software, since all video applications, including webcams, use DirectX for video processing. Try downloading the latest DirectX version and install it (Windows XP: DirectX 9.0c - Windows Vista: DirectX 10). http://windows.microsoft.com/en-US/windows7/Which-version-of-DirectX-is-on-your-computer b> b> Go to Facebook and log into your account. Click the "Profile" tab. Click the "Video" link in the "Status" menu. Select the "Record a Video" option. For privacy reasons, Facebook requests permission to access your webcam and microphone. Check the box next to "Allow" and click "Close." You will appear in real time on the Facebook webcam window. Position yourself in front of the webcam and click the red "Record" button to begin recording your new video. When you're finished, press the "Stop" button. Click the "Play" button to view your video. If you want to post it on your profile, add a brief message and click "Share." If you're not satisfied with the outcome, press "Reset" and record a new video. b> Video Message Log into your Facebook account Navigate through your friends list and select the friend you want to send a video message to on Facebook. Click the "Send Message" link in the upper-right corner of your friend's page. Click the "Video" icon in the attachments section at the bottom of the "New Message" window. Check the box next to "Allow" to give Facebook permission to access your webcam and microphone, and then click "Close." Press "Record" and record your new video message. Click "Stop" when you're finished recording. When you're finished recording, you can press "Play" to preview your video. Hope this helps.

b>

Jan 18, 2013 | CyberLink YouCam

1 Answer

Network Blu-Ray Disc/DVD player -Model BD570C fails to download updates through our wireless system. Message of Update received on screen and after following steps, receive further message that download...


Hello,
I've heard of a few complaints about this specific issue. I'm not sure exactly what it's related to. The one thing that I would recommend is to connect the blu-ray to the internet through a wired connection. The good thing about doing this is that the download will be faster. Its best if you left it hard wired permanantly, but if thats not an option than just use the wired connection for the update, than revert back to wireless when its all set and done.
Good Luck

Jan 07, 2011 | Audio Players & Recorders

1 Answer

Failed software download error messages 02 and 10


My version is actually DTR 67500T but I did not realise that you had recorded a different model !! until too late.The shop replaced it with another box

Nov 10, 2009 | Sagem PVR 6280 Freeview DTV Receiver /...

2 Answers

Unable to connect to skype


everything seems to be connected correctly, but when I try to talk to someone I can see them, but they see me only hear me. I did do a update to see if it would solve the problem. Now I get an unabel to connect message

Jan 23, 2009 | Skype IM

1 Answer

Vrd-mc5


there is a firmware fix on the sony website
VRDMC5 System Software Upgrade Important Notes: New Features:
1) Allows VRD-MC5 to record video directly from a MemoryStick Duo memory card recorded using a Sony's MemoryStick Handycam Camcorder or an HDD/DVD Handycam Camcorder with Hybrid recording capability. Supplemental Operating Instruction
2) Allows VRD-MC5 to record video incrementally from multiple recording media in a Sony's Handycam Camcorder with Hybrid recording capability.

Improvements:
1) Fixes recording problem with no audio using a Digital8 Handycam Camcorder recorded through IEEE-1394 or i.LINK connection.
2) Corrects signal detections with a MiniDV Handycam Camcorder as copy-protected.

Version: 30R2 File Type: zip File Size: 4.11 mb Date: 01/06/2008 Download & Installation Instructions: Please download the attached VRDMC5 System software update file (SNDF8U30.DA2) and unzip it in a folder of your choice on the computer. Also print and read the attached instructions prior to executing the System Software Update.
Attachment Size VRDMC5 System Software Updater.zip 4.11 MB VRDMC5 System Software Update Instructions.pdf

Mar 29, 2008 | Sony DVDirect (VRDVC20) DVD±RW Dual...

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...