Question about Briggs & Stratton Garden
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
A range of strip-down manuals for all Briggs & Stratton engines is avalable - I got mine from Amazon, but you can get them directly from Briggs & Stratton via their web site. They have a look-up system by model series, which ensures you end up with the manual that covers your engine.
Posted on Oct 03, 2009
Find the B&S website and you should be able to download a parts or service manual.
Think it is briggsandstratton.com.
You will also need your type number (after the 92908).
Posted on Apr 18, 2010
This may be of some help to you.
http://engines.myfaqcenter.com/Answer.aspx?p_faqid=3353&selectCats=Troubleshooting - Repairs
Posted on Jun 13, 2010
Remove the recoil. Sometimes depending up on model this required complete air shroud removal. Remove the parts of the old rope. Remove the rope fro the rope handle. NOTE the knot in the handle. Brun both ends of the nylon rope with a match and pinch the burned end into as small of circumference as possible. Install new rope into the starter handle and tie the knot. Pull the new rope into the handle until it seats securely.
Prewind the recoil pulley as far as you can easily wind it. Back it off (unwind) just until the rope guide and pulley knot hole are aligned. Then either c-clamp it in place with the rope knot hole aligned with the rope guide hole or have a 2nd person hold it the pretensioned spring and pulley in position. Thread the rope through the rope guide and on into the pulley knot hole. (takes some effort to get it aligned and through the knot hole!) Pull the new rope through the knot hole and tie 1 knot. Pull starter rope and fit knot into pulley knot hole. Release pulley C-clamp or have helper let go of pulley. Rope should rewind into the recoil.
Reinstall recoil / air shroud. Happy mowing!
Thanks for choosing FixYa.
Posted on Nov 20, 2010
SOURCE: need repair manual for briggs
After a very extensive cross reference session your engine is model number
10H902-0285-E1 (not provided by you so it took a while)
Your engine is covered in this repair manual:
If there is a problem that your having I can help you if you would just elaborate. I could save you lots of time. The 2 most common failures of this engine is on the carburetor. The parts that fail are the diaphragm (Item 394) and the primer bulb (Item 976) of this link:
Carb data is in section 3 of the first link.
Thanks for choosing FixYa,
Posted on May 10, 2011
Tips for a great answer:
Nov 28, 2017 | Briggs & Stratton Garden
Sep 10, 2017 | Briggs Garden
Jul 09, 2017 | Briggs & Stratton Garden
Apr 23, 2016 | Briggs & Stratton Garden
Apr 14, 2016 | Briggs & Stratton 1150 Series Horizontal...
Dec 29, 2015 | Briggs & Stratton Garden
Mar 24, 2015 | Briggs & Stratton Garden
Oct 01, 2009 | Garden
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: