Question about Dometic Heating & Cooling

1 Answer

I have upgrade to a Dometic single zone system. I can run the furnace through its heating cycle just fine but then it doesn't come on by itself. Please respond

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dometic Master
  • 2,521 Answers

Hello Ron Sack,

That means you probably HOSED-UP the wiring when you changed out the control board 18 days ago...

Any chance you took LOTS OF PICTURES and
notes before you started...??

Short of SORTING out all the wiring yourself...
you are now looking at the HIGH LIKELYHOOD
of hiring a professional to in-screw what you've done.

You are advertised as a single zone A/C Dometic...

If you added a few more details... you might actually enable SOMEBODY here to provide meaningful FREE assistance?/

Old control board number?
New control board NUMBER?
Model number...? Pilotless Ignition...?
A/C works...?

Type of THERMOSTAT...??

Seriously...
What did you have BEFORE YOU MIXED THE WIRES...??

What trouble where you fixing???

Carnac the Magnificent

Posted on Dec 25, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am upgrading an analog thermostat to the dometic 3313189 thermostat. My question - how will i connect the present 6 wire to the new 3 wire


Do have AC? if you do you have to by a thermostat that can handle both heating and cooling, if you only have 3 terminals it must be a heat only thermostat.

Nov 17, 2014 | Dometic 3313189.031 3313189.072 Black...

1 Answer

RV. when furnace is turned on , fan on rooftop AC unit runs continually


i would say its the relay board or communication cabl between stat and board.

Jun 18, 2014 | Dometic Rooftop RV Air Conditioner

1 Answer

My 2 zone ac/furnace/heat pump system is not showing zone 2 at all. where should I start to look for a problem?


I assume you are seeing this at the zone board at the unit?
How many zones can a 20-40 ft RV have? seems silly

is 1/2 the coach not getting any thing?

post the model and serial number.

Sep 22, 2013 | Dometic Rooftop RV Air Conditioner

1 Answer

AC fan runs when heater is turned on in RV Dometic single zone


the heat and cool use the same fan. if compressor is running with heat then you have relay issue

Jul 05, 2013 | Dometic 3313192.000 White Single Zone LCD...

1 Answer

What is a E4 code mean


Error Code:
E1 Loss of communication between the Single Zone LCD thermostat and the mod-ule board. LCD will cycle between E1 and the previous mode setting. System
will shut down.
E2 Open circuit or out of range Indoor Temperature Sensor. Heating and cooling
operation will be locked out. Fan operation can continue to operate.
E3 Shorted Indoor Temperature Sensor. Heating and cooling operation will be
locked out. Fan operation can continue to operate.
E4 Open circuit or out of range Outdoor Temperature Sensor (select models). Heat
Pump operation will be locked out. Air Conditioner, Fan and Furnace operation
can continue to operate.
E5 Open circuit or out of range Freeze Sensor. Air conditioner mode of operation
will be locked out. Furnace, heat strip, heat pump and fan mode of operation can
continue to operate but displays the last temperature set-poi

Dec 18, 2012 | Dometic 3313192.000 White Single Zone LCD...

1 Answer

I have a new keystone hideout with dometic single zone lcd thermostat when i put it to furnace the ac fan comes on at same time but when furnace reaches temp. ac fan just keeps blowing cool air?


Obviously wired wrong. I will assume it is still under warranty? If you only recently picked unit up, I would also question the quality of the PDI performed. ( Pre Delivery Inspection) Have you tried to contact dealer you purchased it from?

Oct 14, 2012 | Dometic Rooftop RV Air Conditioner

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dometic Heating & Cooling Experts

Bill Long

Level 3 Expert

587 Answers

Donni Steen

Level 3 Expert

659 Answers

mike cooper

Level 3 Expert

884 Answers

Are you a Dometic Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...