Question about Element Televison & Video

1 Answer

Antenna in on element elewf408 broke @ can. Change the s

Power button turns on but change change the input

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Element Master
  • 74,999 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here. ..

Posted on Dec 25, 2016


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Soo I accidentally pressed the USB button on the element controller and I have no idea how to take it off again sooo...

The USB button is a dedicated shortcut key to select the USB source. To change to another input, press the Source button repeatedly until you have the desired source selected and then press OK. (On the Element ELEFW3916 TV, it's the lower side of the button above the power button on the side. On the remote, the source button is between the volume - and channel down buttons. That puts it below the mute.)

I hope this helps. Please post a comment with the model of your Element TV, if you don't see an Input or Source button on the TV or remote.

Cindy Wells

Jul 17, 2017 | Element Televison & Video

2 Answers

How do I change from cable to antenna?

Without knowing the make and model it is difficult to answer your question accurately. In general you would change either the source or input option. Usually the antenna option is called TV.

Sep 08, 2015 | Televison & Video

1 Answer

Remote will not change channels

If you are using the original remote, it has failed.

Sep 26, 2017 | Pioneer PDP-5080HD 50 in. Plasma HDTV

2 Answers

I had a hdmi but my tv broke and im using difrent hook ups but nothing shows up how do i fix this so i can play agen

Make sure the system is turned off.

Then, hold down the power button for 5-6 seconds, until you hear a second beep.

The video settings will then be reset!

Aug 01, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

Not being able to change inputs

Change the input setting on the tv not the remote.
If you are using a universal remote it may not be programmed correctly.
When you push the input button on the remote it is changing it to the Over The Air Antenna, it is not recieving a signal and there is no channel label added for the station it is set to.
If you do have an antenna connected, from the menu do a channel search and see if it can find any signal.

Let me know how it goes, I can assist further.

Jan 09, 2009 | Philips 32PFL3403D/27 32 in. LCD TV

3 Answers

How Do I Get a DVD to Work with This TV?

Make sure to switch the TV's tuner mode to Video or Aux mode.
You can change the mode using the original TV remote or directly from the TV's control panel.

Again, tuner mode picks up all live broadcast airwaves and Video or Auxillary mode displays what is inputed into the TV via second device..

Good Luck!

Feb 16, 2008 | RCA G32665 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Televison & Video Experts

Cindy Wells

Level 3 Expert

5299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74999 Answers

Are you an Element Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides