Question about Lexmark X5470 All-In-One InkJet Printer
Try changing the port were you connect it. uninstall and reinstall the drivers.
Use another USB tyo connect it.
check the port were the printer is connected and be sure it matches what you have already installed
Posted on Jul 21, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 07, 2012 | Lexmark X5470 All-In-One InkJet Printer
Try to re-seat the cartridges in the printer. Open the printer
cover > remove the cartridges > close the printer cover > re-brick you
printer by pulling out the power supply - black box behind the printer where
the power cord is plugged in, and re-plug after 10 seconds. When the printer
turns on, reinsert the cartridges and close the cover. Try to print a document
again to verify that the problem is fixed.
If that doesn't help, the problem could be due to a clogged print
cartridge nozzle. Please follow the steps below to fix print quality issues
with your model:
From the Maintenance tab, select Clean to fix horizontal streaks.
Your printer will then print a page forcing ink through to clean the print
If that doesn't help, please visit the Lexmark website to update your Lexmark X5470 printer driver. Select your operating sytem > click on FILTER > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation. Then try to print again to verify that the problem is fixed.
Jan 17, 2012 | Lexmark X5470 All-In-One InkJet Printer
quick fix for most communication errors can be achieved by resetting the
printer and/or rebooting the PC. Simply disconnect the printer from your
computer. Reboot your pc. Unplug and re-plug the printer into the power source
to reset it. When the printer turns on, reconnect it to your computer. Then try
to print again once the computer fully recognizes the USB connection.
that doesn't help, try the steps below:
Disconnect the printer from your computer.
Rebrick (pull out power supply, black box where the
power cord is plugged in at the back of the printer, and put it back after 30
On your computer, go to Control Panel > Printers and Faxes.
Delete the Lexmark print object.
Reboot your pc.
When your pc turns on, reconnect the printer.
Wait until your pc fully recognizes the USB connection. To check, go to Control
Panel > Printers and Faxes. If you see a new Lexmark print object in the
list, then try to print again.
may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/dbCiI6.
Select your operating system, download and execute the file.
If the problem continues, please contact Lexmark Technical Support Center for additional assistance.
Aug 25, 2011 | Lexmark X5470 All-In-One InkJet Printer
Jun 14, 2011 | Lexmark X5470 All-In-One InkJet Printer
Jun 21, 2008 | Lexmark X5470 All-In-One InkJet Printer
Feb 15, 2008 | Lexmark X5470 All-In-One InkJet Printer
Feb 11, 2008 | Lexmark X5470 All-In-One InkJet Printer
Jan 26, 2008 | Lexmark X5470 All-In-One InkJet Printer
134 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: