Question about RCA Televison & Video

1 Answer

I have RCA 404n universal remote. I am trying to program a Philips Dvd/VCR combo device. I cannot I guess it out. Please help : thank you. RCA 404n universal remote. Philips DVD VCR combomplayer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • RCA Master
  • 74,383 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Posted on Dec 24, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have RCA 404n universal remote. I am trying to program a Philips Dvd/VCR combo device. I cannot I guess it out. Please help :) thank you.


Use code search to find something that handles some or all functions of your Philips combo. If a search through all codes stored in the remote fails, you may have to try a different universal remote. All universal remotes do not store all possible codes.

Dec 24, 2016 | RCA Televison & Video

3 Answers

I have two RCA remotes. 1st RCU 310 5538P. 2nd RCU 400 2420BB.


Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html
RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

Jan 23, 2016 | RCA Televison & Video

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Televison & Video

1 Answer

It's not working what can I do to program one for all controller to rca tv


HI,
The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the following steps; otherwise skip this section:

HOW TO PROGRAM

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc)

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step.

( CHECK THE BELLOW ADDED LINK TO FIND THE CODE )


2.On the remote control, press a device key once (i.e., DVD/VCR, CBL/SAT, or TV).

NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCRonce. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCRonce. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SATonce.

3. Press and hold SET until the LED (red light) blinks twice, then release SET

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LEDdid not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off.
If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn't work, try Searching For next code.

NOTE: If the device does not have a POWER key, press PLAY

6. Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code following.

Electronics Equipment Repair Center ONE FOR ALL URC3021 UNIVERSAL REMOTE...
Electronics Equipment Repair Center ONE FOR ALL URC3021 UNIVERSAL REMOTE...

Jan 25, 2015 | RCA Televison & Video

1 Answer

I have an RCA universal remote control CGEU401 and have successfully programmed the sony TV. However I have been unable to do so for the Nexxtech VCR/DVD combo model 1619001. I have tried code searc


If there is no setup code in the code list of the remote to serup your Nextec VCR/DVD with RCA universal remote, the remote cant be set to that device. That is all.

Apr 15, 2012 | Televison & Video

1 Answer

PROGRAM ONE FOR ALL FOR A SCHNEIDER VCR PLAYER


How do I Program the One-For-All URC3021 Universal Remote Control (3 Devices)?

The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box.To control devices other than the default brands,perform the following steps; otherwise skip this section:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program
before starting step 2.

2. On the remote control,press a device key once (i.e., DVD/VCR, CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice, then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn't work, try Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, press PLAY.

6. Repeat steps 1 through 5 for each device you want to control. For future reference,write down each working device code.

Hope helps. Your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer. Thank you for using Fixya, and have a nice day.

Oct 21, 2011 | One For All URC-3021 Remote Control

1 Answer

I have a Magnavox DVD/VCR combo that I have lost the remote to. I have bought universal remote after universal remote trying to get one that will work the DVD player or at least will setup the date and...


Universal remote does not work with Magnavox combo of dvd vcr, because no dubbing button. But magnavox has many remotes that will NB884, NB559, NB677.NB627 which also works on Sharp dvd vcr combo.

Nov 05, 2010 | Philips Magnavox Learning Universal Remote

5 Answers

How to program a jumbo touch screen universal remote control


I just found my booklet for the Jumbo Touch Screen Remote Control
item no: NV-00268
if this is your remote; list the device and model name for the codes you need and i'll do my best to help

Jul 09, 2009 | Televison & Video

1 Answer

Programming a remote


The first site is Phillips support you need the model number...enter it at this site the other (later) is a code page I found but no model number makes it harder...let me know the model number if none of these help....thanks for rating my effort...The Fang


http://www.urc.philips.com/


htttp://www.universal-remote.net/philipsmagnavox.html

May 08, 2009 | Philips 5-Device Universal Learning Remote...

2 Answers

Programing rca remote for dvd/vcr combo


all you have to do is press and hold code search when the light shows up let go of code search then press VCR and it will blink onces and let go of VCR and press OFF/ON about 50 times and then press enter onces and there you go

Feb 04, 2008 | RCA Universal Remote 3 Device Remote...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...