Question about Insignia Televison & Video
Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. http://electronicshelponline.blogspot.com/
Posted on Dec 24, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This set should still be under a manufacturers warranty. This set has a board that is very hard to get. Do not let them tell you to wait, or you will wait and not get the set repaired. You need to call and have them repair or have them replace the set before the warranty runs out. If you do you will have a hunk of junk.. Good Luck
Posted on Sep 12, 2007
If your TV is less then a year old, still under manufacturers warranty. If not under warranty the defective parts could be the power supply or the back light inverter board. Both boards can be replace easily.
The way to know if you have a defective backlight inverter is by shinning a light from a flash light near the screen with the TV on and check in a 45 degrees angle if you have a dark video in the background, if the video is present then you have a backlight board failure. If no video, then is a power supply failure.
I have both boards if you want to buy them.
Let me know if you require further assistance.
Posted on Jan 08, 2009
SOURCE: Insignia NS-LCD37 TV - no sound
Start checking the cable connection to receiver, try moving or replacing cables.
If you have a surround with external speakers check surround connection cable and speakers wiring.
If the cables are OK, then the unit may be faulty.
In that case the fault can be either the audio board (often audio circuit is integrated on the main board) , or the sinput output signal board.
Also a contact on connection to internal speakers can give you same problem.
Posted on May 22, 2009
Tips for a great answer:
Nov 04, 2013 | Insignia NS-24 TV TV
on May 23, 2009 | Insignia 37" LCD Flat-Panel HDTV
Sep 01, 2017 | Televison & Video
Nov 19, 2009 | Insignia 37" LCD Flat-Panel HDTV
Nov 09, 2009 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...
Sep 22, 2009 | Insignia NS-L26Q-10A 26 in. LCD TV
May 22, 2009 | Insignia NS-LCD37 37 in. LCD TV
Jan 17, 2008 | Insignia IS-PDVD10 Portable DVD Player
Apr 08, 2018 | Insignia Televison & Video
31 people viewed this question
Usually answered in minutes!