Question about Vizio Televison & Video

1 Answer

VIZIO TV FLASHING POWER ONLY V3.08.0 WHITE SCREEN AND WONT TURN OFF

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Vizio Master
  • 74,473 Answers

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Posted on Dec 24, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vizio m550nv amber light is on but tv will not power on


EASY HOW TO FIX LED Vizio TV- no power - YouTube

? 6:13
https://www.youtube.com/watch?v=9xZcTWr2yV0
Nov 5, 2013 - Uploaded by Tampatec
DiY How to Fix led / lcd Vizio TV service repair - no powerservice repair review guide no red blinking led ... Theorange/amber light turns on when plugged in. But the TV won'tturn on after that (the light does not turn white).

Vizio TV logo Flashing (Blinking), TV will not turn on, not ...

? 4:01
https://www.youtube.com/watch?v=MDzCzZdgbdg
Jan 5, 2012 - Uploaded by Leo P
This is model XVT3D424SV, I was watching a DVD, I switched the input to TV, tried to connect to netflix, it was ...

HOW TO FIX VIZIO TV - What causes no power - YouTube

? 5:53
https://www.youtube.com/watch?v=5k1Mc1f6O3E


Jan 17, 2016 | Vizio M550NV 55 in LCD HDTV

1 Answer

How do I fix my lcd tv that won't turn on? It does not appear to be the powerboard.


Vizio logo is an indicator that the tv is live n changes to white that the screen is on meaning if no change to white the smps switch mode power supply board ain't switching the mother board....diagnosis is its MOSFET transistors need replacement or the smps board n ya tv will be fine

Sep 22, 2015 | Vizio XVT473SV 47 in. LCD HDTV

1 Answer

Vizio VO47L FHDTV10A wont turn on, logo goes from amber to white, tv clicks once and wont turn on. remote will try to turn the tv on. suggestions?


check your inverter board and wires 2 make shure there not arking. then check your six transformers on your inverter with volt meter

Jan 31, 2013 | Televison & Video

1 Answer

Vizio sv41xvt flashing logo. won't power up


Sounds like either a power circuit board or mainboard failure. I'm going through same problems, mine is power board failure.

Jan 11, 2013 | Vizio SV471XVT 47 in. LCD TV

1 Answer

I have a vizio tv and it wont turn on it showed the vizio logo and now it wont turn on and its been like this for 2 days


The main board will need replacement. Its very common issue where the set will freeze at the vizio kogo then eventually it wont turn the logo from orange to white so it can power up. Replacing the main board should solve the issue. You can get the replacement main board from www.tvcircuitboards.com

Jan 03, 2013 | Vizio L32 32 in. LCD HDTV

1 Answer

The Visio on front blinks orange and white with black screen


The tv is powering down when flashing. Hold the power button down for thirty seconds, this will shut the power down completely. \do this after you unplug it. than plug it back in. it will still blink but only for a few seconds then you should be able to turn the tv on

Jul 27, 2012 | Vizio M470NV 47 in. LCD HDTV

2 Answers

Vizio GV42L 42inch LCD/HDTV


there are several possibilities. first if the unit comes on and the "VIZIO" light turns white, but no picture or sound, then the main control board is most likely the issue. could be the LCD control board(s) depending on model one or two. and ultimately could be the power supply on the upper side....if the "VIZIO" light does NOT turn white, the whole power supply unit is out. after that, would have to scope the circuits to find out. Seems that the control board is the most common and tends to happen on many different sizes. new board will be around $350.00. Might get lucky and find a used one, but it MUST be EXACT part or it wont work right. if you dont find one or want to sell yours for parts, id be interested in the screen. can reach me at kmarlin@grandvalleygolfclub.com. thanks, keith

Jun 27, 2009 | Vizio GV42L 42 in. LCD Television

2 Answers

I went to turn on my Vizio and the scrren was


Do you have back light when turning on the TV? if you do then just replace the main board should resolve the problem. if you do not have back light, you will need to replace the inverter board(s) depending on your model. The inverter board(s) is located on the left side of the TV facing back of TV. you may have two inverter boards depending on your model. the other is located on the right side of the TV. Both mount vertically.

Jun 17, 2009 | Vizio L32 32 in. LCD HDTV

Not finding what you are looking for?

Open Questions:

Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...