Question about Fujitsu Televison & Video

1 Answer

Fujitsu P42VTA40ws No power - Fujitsu Televison & Video

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fujitsu Master
  • 6,694 Answers

Sounds like The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Posted on Dec 24, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where i can buy, power socket for my amilo pro v2010?


Just one example,

http://www.laptopjacks.com/view_part/For-Fujitsu-Amilo-Pro-V2010-DC-Power-Jack-FJ41420.html

The power socket in the laptop that the AC adapter (Charger) plugs into is a DC Power Jack.

Type Amilio Pro V2010 DC Power Jack in your browser search bar, press the Enter key.

To add:

http://www.laptoprepair101.com/laptop/2007/12/06/dc-power-jack-repair-guide/

Nov 07, 2010 | Fujitsu Siemens AMILO Pro V2010 Notebook

2 Answers

How do i fix the random shutdown of my fujitsu 42"


Hi,

A repair to the power supply is required. Please call fujitsu for information

Apr 25, 2010 | Fujitsu Plasmavision P42HHA10 42 in....

1 Answer

Fujitsu Plasmavision 42 42'' TV 4209 picture last for 5 minunets then black ??? Power supply ???


No not power supply, it's the X and Y sustain boards. These boards have to be replaced as a pair.

Contact Fujitsu for a repair of this unit.

Feb 16, 2010 | Fujitsu Plasmavision PDS-4209 42 in....

2 Answers

42 Fujitsu PDS4221W-H, no power


A user manual is available from this link:-
http://safemanuals.com/user-guide-instructions-owner-manual/FUJITSU/PLASMAVISION%20PDS4221-_E
Check for a hidden power switch under the lower left or right under corner of the screen, ensure it is ON (- not sure if this switch is fitted to your model, but it does exist on other Fujitsu models).
Fujitsu no longer support or manufacture plasma screen TVs - therefore no parts are available from them. [Fujitsu only serviced to board replacement level - very expensive].
The Fujitsu models (generally, after 4 or more years use) suffer from cracked solder joints on circuit boards (due thermal cycling stress).
See Fixya tips:-
"Fujitsu Plasma 42" random shutdown - continuous flashing red led".

Oct 28, 2009 | Fujitsu Plasmavision 42" TV

2 Answers

How do you keep lan on all the time on fujitsu


It's in power management settings on the lan connection ensure allow computer to turn off to save power is not selected

Oct 24, 2009 | Fujitsu AMILO D-7820 Notebook

1 Answer

Fujitsu power supply shutdown goes to standby mode. no picture. If I turn it off for a while I get great picture and after a while it shuts down and goes into standby mode. Is this a power supply that is...


This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in the P42HHA10 model. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A similar Service Bulletin is probably available to suit your model. A competent service technician should be able to implement the service bulletin.

Jun 02, 2009 | Fujitsu Plasmavision PDS-4242 42 in....

1 Answer

Fujitsu Plasma Screen won't power up


This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in a similar model from Fujitsu. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.
A similar service bulletin is probably available for your model. Request bulletin from Fujitsu 'service@fujitsugeneral.com'

May 18, 2009 | Fujitsu Plasmavision PDS-4242 42 in....

1 Answer

Is it possible to repair c200 power supply


Fujitsu C200 has very precise power supply. And it is always recommended to buy new one.

Jan 27, 2009 | Fujitsu Siemens PRIMERGY C200 Server

1 Answer

42" Fujitsu Plasma TV (About 10 yrs old)


You have not fully identified the model number of your unit, but
this is most likely caused by the Main Power pcb.
For models P42HHxxxxx and P42HCxxxxx see Fujitsu Service Bulletin on this problem. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.

Sep 29, 2008 | Fujitsu Plasmavision 42" TV

1 Answer

Fujitsu 42" Plasma Display shuts off after 20 minutes


This is most likely caused by the Main Power pcb.

See Fujitsu Service Bulletin on this problem in a similar model from Fujitsu. -see link below
http://tomtom2k5.free.fr/fujitsu/PDP-0035-06.pdf

A competent service technician should be able to implement the service bulletin.
A similar service bulletin is probably available for your model. Request bulletin from Fujitsu 'service@fujitsugeneral.com'

Oct 21, 2007 | Fujitsu Plasmavision PDS-4233 42 in....

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Cindy Wells

Level 3 Expert

5129 Answers

Are you a Fujitsu Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...