Question about Televison & Video

1 Answer

NS-27LCD lashing logo - Televison & Video

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,710 Answers

Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Posted on Dec 24, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix ns-27lcd with no sound


hi, before guessing what might be wrong reset the set to factory default through the settings menus. If that does not cure it there must be a fault in the sound output or in the speakers. It would a technician to diagnose at that stage.
Try the reset first.
Good Luck

May 29, 2015 | Televison & Video

1 Answer

Insignia NS-27LCD TV, got a nasty static shock, and now I just get a blinking red light on the front. Nothing else happens...I left it unplugged for a year (yes, a year lol) and I am still having the same...


Jason, this does sound like a main unit issue...although not 100% certain. Give a company named ShopJimmy.com a try for parts. They have been a huge help to me in the past. I included a link to your model page from their site. Hope that helps!
http://www.shopjimmy.com/catalogsearch/result/?q=NS-27LCD
TeeVeeMan2@gmail.com

Sep 21, 2011 | Sony BRAVIA KDL-40S2010 40 in. LCD...

2 Answers

No power when switched on . Insignia model ns-27lcd


Power supply module will be the first place to look, it can be from bad DC filter caps (leaking/bulging top, high ESR), blown main AC fuse, etc.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Jul 16, 2010 | Insignia NS-LCD26-09 26 in. HD-Ready LCD...

1 Answer

My NS-27lcd makes a clicking noise when you turn it on the screen is black and the please wait emblem flashes in and out. After playing with it (I mean turning it on and off again about 50 times until the...


tmcdonald19- did you ever get your TV fixed? I have 2 that have(had) the same problem. I replaced most of the caps, and 2 of the rectifiers (MB20150CT)....one works and the other still has the same problem.

Dec 12, 2009 | Insignia Televison & Video

2 Answers

Insignia NS-27lcd tv won't turn on


Well, take the plug that goes to the inverter board out which has the 12v on it. Check the 12v again at the power supply. If 12v is low you can possibly have 2 caps bad, the values should be about 1000uf/35v or there abouts. They set close to the plug. If that doesn't work then replace the Power Supply because there are no service manuals for lcd p/s. plus nearly impossible to locate individual ic's. Try Shop Jimmy.com for the P/S.

Apr 30, 2009 | Akai LCT3701AD 37 in. LCD Television

1 Answer

No picture, no sound, does light the insignia sign. Why?


In about 90% of the time the power supply is defective if the TV fails to power ON.
I repair these power supplies, if you need further assistance write to jah2mil@homtail.com

Apr 17, 2009 | Insignia IS-LCDTV32 32 in. Television

1 Answer

27'' LCD panel compatability


Both power supplies are supplying the same voltages to the circuits but in order to use the one from the NS-27LCD 27" you will need to change the wiring configurations to make it work for the LCT2715..
I could repair the power supply from the LCT2715 for under $90.00 including parts, labor and shipping it back to you.
Let me know if you require further assistance.

Mar 01, 2009 | Televison & Video

1 Answer

Need remote code to program denon RC-1048 with Insignia NS-27LCD


Try this Link.
http://www.usa.denon.com/ProductSupportAndArchives.asp

Dec 14, 2008 | Denon PMD750 Grayscale Remote Control

1 Answer

SERVICE CODE


I have a 26" Insignia HD-TV and just found out the cable remote code (to connect TV with the cable box) is 0463.  If that's not what you need, try calling Insignia's help line at 877-467-4289

Mar 27, 2008 | Insignia LCDTV26 26 in. Television

1 Answer

Insignia NS-27LCD Remote


I would replace the remote, you can buy an OEM remote at the link below. 1 800 Remotes

Apr 05, 2017 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Cindy Wells

Level 3 Expert

5062 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...