When I use my oven where the convection fan is the heating element will not turn off. Even after clicking on the off button.

if your unit is switch position is the upper heating element is have convection? you cannot turn off the fan,but if your unit have separate option to choice the other option to oparate separately the upper heating element this one can be use.

f the oven doesn't heat and the on-off light works, test the appliance controls, motor,
and heating element .

whilst the fan is running the heating element which is usually in parallel with it should heat.. This usually means a faulty element..

You need to replace the oven fan element, as there is probably a seperate element in use when used on convection heat.
Please rate my solution.
Thanks.

Bake and convection bake settings both use the bottom bake element to heat. It would be unusual for bake to work without conv. bake working. You also have pure convection which uses a different element surrounding the conv. fan on the back of the unit. If you press a feature and nothing happens it's the touch pad. If it comes on then turns back off it's probably the ERC (clock). If it comes on and wont heat only in pure conv. possibly an upper relay board or element problem.

DO you have a model number for that. I'm almost sure it's a thermal fuse in the back of the oven. Usually they go out during or after cleaning but that would shut down both elements. If you have the model (usually by the inside door look all over and up in the cavity) Then if you go to this link

http://www.searspartsdirect.com/partsdirect/index.action?intcmp=xsite_Sears

It will show you a breakdown of the oven and where it is. If you give me the model I'll show you what I'm talking about. Good luck.

P.S. if it the fuse it's a cheap fix, little hard to get in back of the oven but cheap!

If the oven is electric and fan assisted,then I would suggest that the oven fan element is faulty.
Plz rate this solution.
thanks.

Bake- Normal convection- both upper and lower heating elements.

Conv. Bake- Semi-forced convection- both upper and lower elements, heat is then distributed throughout the oven via the fan.

Broil- radiation- The heat is radiated by the ifrared broil element.

Broil & Fan- Radiation and Ventilation- The radiated heat from the infra-red broiling element is distributed throughout the oven via the fan.

Question: does the unit appear to hold the correct temperature? Most convection units only turn the heating elements on and off...not the fan. If the unit is reporting operating temp and then taking other direction...and it is cooking right...you're done.

the ring element may have blown. if it works ok with the top and bottom elements, (the convection oven) then it is likely the element surrounding the oven fan.