Question about Hamilton Beach Coffee Makers & Espresso Machines
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It's called a tank, not a pot. $9 CDN. Haven't been able to find in US yet. This is very hard to belive considering they make so many small appliances I think HB is not making parts available intentially to get consuners to buy again. Not sure this is smart.
Posted on May 16, 2008
There is a spring between the lever and the o-ring. It may have popped out when you cleaned the pot. That has happened to me before. The spring is necessary to hold the seal down until the lever is pushed.
Posted on Mar 16, 2009
SOURCE: Leaking Coffeepot
I have the same leaking problem. I just called Hamilton Beach and gave them the model and serial numbers. They are sending me a new "gasket" complimentary but she said if that doesn't work, I'll have to order a whole new coffee tank.
Posted on Apr 09, 2009
I had the same problem with this same machine. On this model there is a
spring-loaded piece of plastic that operates the pouring of the coffee.
After a few months of regular use, there is a design flaw in this piece
that wears out prematurely, causing the pour to slow down. This is why the stream runs towards the machine and not in your cup.
Eventually the plastic piece will break at the weak point and will stop pouring altogether. To make matters worse, HB uses a weird screw that you cannot turn unless you have the right bit, and, once you do finally get to the piece, there is no where to order a replacement.
Summary: Hamilton Beach built an intentional flaw that is difficult/impossible to repair so you will need to purchase another machine in under a year.
Posted on Feb 24, 2010
Testimonial: "I have concluded all this answer told me. This is a very inferior machine."
I just got mine via auction. All it did was steam, very little dripping. I took mine apart (used anyway) and found the water line has a soft tubing connecting metal pipe to plastic top drip part. It was crimpped. Was able to twist and straighten. Now works fine. Beware though when closing machine I caught a wire, had to fix that.
Posted on Aug 09, 2010
Tips for a great answer:
Dec 27, 2012 | Hamilton Beach BrewStation 47665
Jun 04, 2011 | Hamilton Beach BrewStation 47224 Coffee...
May 13, 2011 | Hamilton Beach BrewStation 47224 Coffee...
Jan 12, 2011 | Hamilton Beach BrewStation 47224 Coffee...
Nov 16, 2009 | Hamilton Beach BrewStation 47214 Coffee...
Mar 13, 2009 | Hamilton Beach BrewStation 47214 Coffee...
Oct 14, 2008 | Hamilton Beach BrewStation 47224 Coffee...
Feb 12, 2008 | Hamilton Beach BrewStation 47224 Coffee...
42 people viewed this question
Usually answered in minutes!