Question about Bosch Washing Machines
Then REPLACE CARBON BRUSHES (something happend with the commutator on the motor, in most case the brushes
But reset it to release the code BEWARE !! after change the brushes ..
1 close the door
2 program knob to zero
3 program knop to down (like on a watch as a hand pointing to the 6 )wait 2 seconds
4 Now press the speed button and keep it pressed meanwhile pressed the button turn the program knob to like its axis the hands 1one little step to the 7 like the number seven on a watch in comparison
5 after 2 seconds release the speedbutton
If all is right than there must 888 be displayed ..
Finally turn the program knob to 0
Posted on Dec 23, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 25, 2017 | Bosch Washing Machines
Feb 22, 2015 | Bosch Washing Machines
May 04, 2014 | Bosch Washing Machines
May 13, 2012 | Bosch Washing Machines
Mar 08, 2011 | Bosch Classixx WFL 2066 Front Load Washer
F21 relates to a motor or control board fault.
However, it is also caused by spikes in the mains and can be spurious.
To reset it.
Turn the appliance knob to the off or reset position, 12 o'clock.
Turn the knob to the 6 o'clock position.
Press and hold the spin button.
While holding it, turn the knob to the 7 o'clock position.
Continue holding the spin button for about 5 seconds.
Release the button.
Turn the knob to off.
When your turn it back on it should have cleared the error code
Nov 27, 2010 | Bosch Washing Machines
Oct 25, 2010 | Washing Machines
38 people viewed this question
Usually answered in minutes!