Question about Mitsubishi WS-55807 TV

1 Answer

Power light comes on for 2 seconds and then off.

I own a Mitsubishi WS55807.  For the last week, when I would hit the power button, the power light would come on for 2 seconds and then then turn off.  No pic or sound.  Today I decided to unplug it from the power strip and go direct into the wall outlet.  The picture & sound came back for about 1 minute and then went out again.  Now when I hit the power button, the sound and pic come on for less then 1 second and then turns off.  Any assistance would be appreciated.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 616 Answers

Need to have the power supply rebuilt, expect to pay around $350 Julio at milleniumtvsvc@gmail.com

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My mitsubishi vs 50707 won't go on, when i hit the power button it goes on for a second and then off.


It is a possible power supply board issue, but that is just a guess without any testing.

Nov 27, 2016 | Mitsubishi Televison & Video

3 Answers

I have a Mitsubishi WD 52628. I replaced the tv


try turning it on hold the menu button for eight seconds menu pops up try reseting the settings again as before you had the problem

Jan 23, 2010 | Mitsubishi WD-52628 52" Projection HDTV

1 Answer

Mitsubishi WS-55859 power light comes on and then goes off.


I get an error code of 2- 2 x 10 etc Ten times I saw two blinks of the on light. I had a power relay replaced in the year one ,fixed it.then. what do I do now to fix it. What part would you replace thanks.

Dec 22, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Problem w/ Mitsubishi WS-65869After losing power


I found this answer and I believe it fits your problem perfectly.
Your TV has two microprocessors that depend on each other for communication. The problem is that a power glitch gets them out of sync. Try this:
1. Press the power button and wait for the blinking light to stop.
.
2. Press all the front panel buttons one at a time, except for the reset, and power button.
This will send a command to one processor and sets an interrupt.

3. Hit the power button, and the TV should power up.

4. Set the TV to low energy mode(see TV manual to find out how to do this. Doing this step will help prevent the problem from coming back. These instructions were taken from a Mitsubishi service manual.

Oct 03, 2009 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

WHEN U HIT THE POWER BUTTON IT TRYS TO COME ON THEN CUTS OFF


it the power light comes on for 1/2 second and then turns off, you have bad convergence chips, part number stk 392-570, or stk 393-110, you also have one or 2 blown 5 amp pico fuses, common repair, but you could not do it yourself unless you are a qualified tv repairman.

Sep 07, 2009 | Mitsubishi WS-55807 TV

1 Answer

Light engine


hold menu and input or device button at same time for 5sec. Let me know what blinking code you get. 3-2 6-1 etc.

May 25, 2009 | Mitsubishi WD-62531 Projection Television

1 Answer

Press power button green light comes on.But no picture no sound,


I have had my WS-65511 fail like this, first at 4 years, second 2 weeks later, then 3rd time yesterday (4/14/2009). In past, the tech replaced a thermal sensor p/n 299P313010A (but Mitsubishi says that part is not for WS-65511 and that it does not have a thermal sensor - go figure). It is a white rectangle with about 30 pins in 2 rows and is soldered onto a board in the TV. List price is about $25. Might be your problem.

Apr 04, 2009 | Mitsubishi WS-65511 65" Rear Projection...

2 Answers

50" philips won't power on. get the 4x red blink led light


i have fixed 3 of this tv, with that exact problem in the last 2 weeks, needs a power supply, you can try to unplug it again, plug it in, hit the power button, as soon as it turns green, unplug it again, after 15 seconds , plug it back in, if power doesnt turn on by itself, turn it on, if it turns red again, emediatily hit power again, may have to hit power a few times in a row, but most of the time you can get it to come on this way, once it is on, it should run ok, until you turn it back off, but not a fix, needs power board

Jan 10, 2009 | Philips 50PF9631D 50 in. HD-Ready Plasma...

1 Answer

Mitsubishi HDTV 1080 WS-55859. Error Code 12


Did you push in the device and the menu buttons at the same time and get the error code...  I have the same problem and I get a 1,2 code....   I am looking for what the codes stand for...
Have you got any help on this....
Scott
mu email is smartin38@verizon.net

Sep 11, 2008 | Mitsubishi WS-55859 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55807 TV Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...