Question about Car Audio & Video
When I hit the set time button; don is displayed.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Setting the hands on this watch
press your "mode" button 5 times until it says on lower display "H-SET". Then press the "adjust" button until it beeps.
Now hold the "forward" button and the minute hand is moving.
Posted on Feb 03, 2008
SOURCE: Dryer door pops open after
door strike is bad also door may be warped make sure door is not warped if it is just twist in opposite direction if strike needed part #279570
Posted on Jun 14, 2008
If you haven't got instructions on how re-set the analogue hands, you can get instructions from the Casio web site.
Go to the casio web site "casio.com".
Select "support" and the "manuals",
Select "watch manual archive"
Read the number of the back of your watch and enter it into the search box
Posted on May 31, 2010
Tips for a great answer:
Jan 03, 2015 | Health & Beauty
Dec 09, 2014 | Westclox 70026A LCD Atomic Digital Alarm...
1) Set current time:
Press reset button to clear all programs , display should flash 12:00 AM Monday
Press and hold CLOCK button.
Press Hour, minute and day buttons until current hour minute and day display.
Release Clock button.
Next step is to program the timer
Example shows how to turn on at 5PM each day and turn off at 11 PM each day.
2) Programming review: Each program requires ON time to be set, and then OFF time to be set For example you set Program1 ON 5:00PM for ALL days. And then you set Program1 OFF 11PM for ALL days. Minimum on-off set time is 1 minute.
3) Programming steps: Press PROG button until Timer 1 ON appears on display Use Hour button to set 5 PM Use MIN button to set :00 Default selects ALL days (If you want other days, press DAY button until display shows correct block of days) Press PROG button again to save Program1 ON 4) Now for Program1 OFF 5) To set Program1 Off Press PROG button until Timer 1 OFF shows in display. Use Hour button to set 11 PM Use MIN button to set :00 Default selects ALL days (If you want other days, press DAY button until display shows correct block of days) Press PROG button again to save Program1 OFF 6) Program 1ON and Program1 OFF have been set ... so press the CLOCK button to return to current time. If you want to set another program, press PROG button until Timer 2 ON displays 7) After setting programs, press Clock button so current time shows. 8) The manual shows one more thing ... if you program the timer during the hours 5-11pm, and the timer should be ON during those hours, you have to 'tell' the timer to turn ON by pressing the manual override ... after that the timer will operate normally.
Nov 21, 2011 | Woods 59028 Programmable Timer Switch...
Aug 01, 2011 | 2002 Chevrolet Silverado 1500
Apr 17, 2011 | Audio Players & Recorders
Nov 10, 2010 | Woods InWall 7 Day Digital Programmable...
Feb 18, 2010 | Clarion Car Audio & Video
Nov 06, 2009 | 2005 Jeep Grand Cherokee
Nov 03, 2009 | Timex 1440 Nylon watch
Mar 19, 2018 | Car Audio & Video
29 people viewed this question
Usually answered in minutes!