Question about Radio Communications
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the beep are known as "over beeps", they are generated at the end of a transmission by the transmitting raido to signal that the user has taken his or her finger off the transmit button and has ended transmission, like how they used to say "over". as for the hissing, have you tried adjusting the squelch?
Posted on Dec 10, 2008
press the "prog" key followed by the "Trunk" key then the number "1" key.
Press the "down arrow" key until you see the initials Ed on the screen
Press the "E" key.
Enter the frequencies (including the decimals)
you must press the E key and the Prog key after each frequency, after you finish entering your frequencies, press the scan key.
If you need to clear your scanner, turn it off, press and hold down the number 2 and number 9 keys, while holding them down turn the scanner back on, "clear" should start flashing on the screen, once "clear" stops flashing you can enter the frequencies.
Posted on May 07, 2009
Tips for a great answer:
May 15, 2016 | Radio Shack Radio Communications
Jul 31, 2014 | Uniden BC60XLT-1 Handheld Scanner
Nov 11, 2013 | Radio Shack Pro-97 Handheld Scanner
Mar 16, 2010 | Radio Shack Pro-97 Handheld Scanner
Nov 18, 2009 | Radio Shack Pro-95 Handheld Scanner
Nov 09, 2009 | Uniden BC92XLT Handheld Scanner
Jul 03, 2009 | Uniden BC60XLT-1 Handheld Scanner
May 27, 2009 | Uniden BC72XLT Handheld Scanner
Aug 31, 2008 | Uniden BC246T Handheld Scanner
66 people viewed this question
Usually answered in minutes!